Optional Accessories - Vizeri VZ230 User Instructions

Maintenance and Warnings
1. Only high quality batteries should be used.
2. Due to the high brightness, do not shine directly into
eyes. Children should only use the light under
guidance of adults. Please keep the light away from
children.
3. Avoid using the light for a lengthy time in chemicals,
or corrosive gas to protect the flashlight's surface
treatment.
4. It is suggested that the O-Ring be lubricated or
replaced if defective to ensure its waterproof perfor-
mance.
5. Users should lubricate the screw threads 2-3 times
per year to ensure smooth performance.
6. Use a soft brush and alcohol to clean the flashlight
when needed.
7. If unused for a lengthy time, take the battery out to
avoid corrosion. Lithium-ion batteries should be
recharged every 3 months to maintain maximum
performance.
8. Non-professional personnel should not disassemble
the flashlight to avoid circuit damage.
Red-Orange Di user (sold by Vizeri)
Bike Mount (sold by Vizeri)
18650 Lithium-Ion Rechargable
Batteries (not sold by Vizeri)
Verzeri, LLC
8161 Highway 100, #194
Nashville, TN 37221
www.vizeri.com
How to Change the Switch-Cap on the Vizeri VZ230
1. Remove the end cap and locate the two holes near
2. Place the tips of a pointed tweezers in the two
3. Turn the tweezers in a counter-clockwise direction,
4. Push on the switch cap and it will pop in. Put the

Optional Accessories

VZ230-SW Remote Switch (sold by Vizeri)
Press button to turn on,
release to turn o . Cycles
through modes on each press
unless the light is left on at
least 2 seconds and o for 2
seconds.
30mm Weapons Mount (not sold by Vizeri)
The ashlight ts in loosely on a 30-millimeter weapons mount so it must
be wrapped with black tape, bike handlebar tape, or some other
padding. This eliminates metal-to-metal contact which prevents wear
caused by the impact of ring the gun.
the spring.
holes.
to remove the spring.
new switch cover on and reverse this procedure.