Product Description; Operating Instructions - Wahl Z100 Instructions Manual

PRODUCT DESCRIPTION

Description of parts (Fig. 1)
A Blade set
B Cutting length adjustment lever
C On/off switch
D Mains cable
E Adjusting screw
F Blade guard
G Oil for blade set
H Cleaning brush
Not pictured Attachment combs and various accessories (depending on
model)

OPERATING INSTRUCTIONS

Preparation
Keep the packaging material for safe storage or transport later.
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Handle with care! Damage due to incorrect power supply.
f Only operate the appliance with an alternating current and with
the voltage stated on the nameplate.
Mains operation
1. Oil the blade set (Fig. 6).
2. Insert the appliance plug into the mains socket.
3. Switch on the appliance using the on/off switch (Fig. 2a) and, after use,
switch it off again (Fig. 2b).
Accessories are available from your dealer.
Adjusting the power screw (Not found in all Wahl models)
MAINS CLIPPER
9