Panasonic ER2201 Operating Instructions Manual page 7

7. Remove the 2 screws (l) and
disconnect the rubber push
plate (m).
8. Remove the screws (n) and
disconnect housing (o).
9. Disconnect the battery chamber (p)
and remove the battery (q).
• Discharge the battery completely
before removing it.
• Be careful not to short the + and –
terminals of the battery after
removing it.
For environmental protection and recycling of materials
This trimmer contains a Nickel‑Metal Hydride battery. Please
make sure that the battery is disposed of at an oficially assigned
location, if there is one in your country.
Please read "Information for Users on Collection and Disposal of
Old Equipment and used Batteries" on page 104.
(n)
(o)
( l )
(m)
(q)
(p)
7