Philips LFH 9160 User Manual page 19

Open the LAN Docking Station configuration interface by entering its IP address in your
5
Web browser.
You will be prompted to enter a user name and a password. Leave the user name field empty
6
and enter ‚administrator' in the
Change the IP address of the LAN Docking Station according to your network policy. See
7
Changing the IP address of the LAN Docking Station
For users of the Digital Pocket Memo 9620 (with Philips 4-position slide switch):
Make sure that the LAN Docking Station is connected to the main power supply using the
1
Philips power supply.
Slide a Digital pocket Memo 9600 or 9620 into the docking slot of the LAN Docking Station.
2
Press and hold the EOL,
3
simultaneously for 3 seconds.
The configuration settings of the LAN Docking Station will reset to their factory defaults,
4
and the LAN Docking Station will restart. The IP address of the LAN Docking Station will be
set to 192.168.109.1 (subnet mask 255.255.255.0).
Open the LAN Docking Station configuration interface by entering its IP address in your
5
Web browser.
You will be prompted to enter a user name and a password. Leave the user name field empty
6
and enter ‚administrator' in the
Change the IP address of the LAN Docking Station according to your network policy. See
7
Changing the IP address of the LAN Docking Station
User manual
PASSWORD field.
on page 14 for more information.
the RECORD and the MENU
PASSWORD field.
on page 14 for more information.
button on the Digital Pocket Memo
19