Using Control For Hdmi - Sony XEL-1 Operating Instructions Manual

~
• "USB Photo Viewer" supports DCF-compliant
JPEG photographs only.
• When you connect a Sony digital still camera, set
the camera's USB connection mode to Auto or
Mass Storage. For more information about USB
connection mode, refer to the instructions supplied
with your digital camera.
• "USB Photo Viewer" supports FAT32 file system
only.
• During watching a photo or playing slideshow for
a long period of time, the screen may gradually
fade to dark or the screen saver may appear.
• While the TV is accessing the data on the
recording media, observe the following:
– Do not turn off the TV or connected USB
device.
– Do not disconnect the USB cable.
– Do not remove the recording media.
The data on the recording media may be damaged.
• Do not use unsupported USB device. This may
cause malfunctions.
• Sony will not be held liable for any damage to, or
loss of, data on the recording media due to a
malfunction of any connected devices or the TV.
• Check the website below for updated information
about compatible USB devices.
http://www.sony-asia.com/bravia/usbphotoviewer

Using Control for HDMI

The control for HDMI function enables the TV
to communicate with the connected equipment
that is compatible with the function, using
HDMI CEC (Consumer Electronics Control).
For example, by connecting Sony equipment
that is compatible with control for HDMI
(with HDMI cables), you can control them
together.
Be sure to connect the equipment correctly,
and make the necessary settings.
Control for HDMI
• Automatically turns the connected
equipment off when you switch the TV to
standby mode using the remote.
• Automatically turns the TV on and
switches the input to the connected
equipment when the equipment starts to
play.
• If you turn on a connected audio system
while the TV is on, the sound output
switches from the TV speaker to the audio
system.
• Adjusts the volume (2 +/–) and mutes the
sound (%) of a connected audio system.
• You can operate the connected Sony
equipment by the TV remote by pressing:
– OPTIONS to display "Device Control", then select
options from "Menu", "Options" and "Content List"
to operate the equipment.
– Refer to the instruction manual of the equipment for
available control.
To connect the equipment that is
compatible with control for HDMI
Connect the compatible equipment and the TV
with an HDMI cable. For details, see page 24.
To make the control for HDMI settings
The control for HDMI settings must be set on
both the TV side and connected equipment
side. See "HDMI Set-up" on page 34 for the
TV side settings. For settings on the connected
equipment, refer to the operating instructions
for that equipment.
~
• Control for HDMI is only available with the
connected Sony equipment that is compatible with
control for HDMI.
27
GB