Dexford SPA-WS100 Operating Manual page 7

1. Solar cells
2. On/Off switch
3. Set time
Intended use
This weather station is designed to be used indoors, to set and read the time and to read the temperature (°C and °F) and relative
humidity (in %). The weather station can also be used as an alarm clock. Any other use is considered unintended use. Unauthorised
modification or reconstruction is not permitted. Under no circumstances open the device or complete any repair work yourself.
Inserting the battery
Remove the battery compartment cover and insert the battery (AA) in the battery compartment (5), paying attention to correct
polarity.
Charging the built−in battery
Set the On/Off switch (2) to ON". When the lighting conditions are sufficient, the built−in battery is charged.
Setting the time
Turn the adjustment wheel (3) to set the time (hour and minute).
Setting the alarm time
Turn the adjustment wheel (4), to set the alarm time (small white pointer).
Switching the alarm on/off
Use the switch beside the adjustment wheel (4) to switch the alarm clock on/off.
Operating Manual SPA−WS100 G
Solar−Powered, Analogue Weather Station
4. Set alarm time / Switch alarm on/off
5. Battery compartment
7