Customer Responsibilities; General Recommendations; Engine Maintenance - Murray EV3850x4NA Instruction Book

3.8 horsepower 9 inch blade edge / bevel cut
Table of Contents

Advertisement

CUSTOMER RESPONSIBILITIES

Lubricate All Pivot
Points
Lubricate Wheel
Axles
Check Engine Oil
Level
Check Spark Plug
Check Drive Belt
Tighten All Fasteners
Check Blade For
Wear Or Damage

GENERAL RECOMMENDATIONS

The warranty on this Edger does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, the operator must main-
tain the Edger as instructed in this manual.
Some adjustments must be made periodical-
ly to properly maintain your Edger.
All adjustments in the Service and Adjust-
ments section of this manual must be
checked at least once each season.
F–041105C
MAINTENANCE

ENGINE MAINTENANCE

Use the following maintenance section to
keep your unit in good operating condition.
All the maintenance information for the en-
gine is in the "Engine Instruction Book". Be-
fore you start the engine, read this book.
LUBRICATION
1. After each 25 hours, apply a small amount
of engine oil to all moving parts, particular-
ly the wheels.
2. To lubricate the engine, refer to the "En-
gine Instruction Book".
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents