Osd2151 Front And Rear Panels - Optical Systems OSD2151 SERIES Operator's Manual

1.4

OSD2151 FRONT AND REAR PANELS

There is one fixed copper port for 10/100/1000Base-T and one SFP port on the front panel. The SFP
device is sold separately giving the user choice to use either one or two fiber communications with
various optical power outputs depending on the distance required. The rear panel consists of a 2-way
term-block power connector and a 3-Way DIP switch. Each section will be described further
throughout this manual.
PAGE 8
OPTICAL SYSTEMS DESIGN
FIGURE 2: OSD2151 CONNECTORS
OSD2151 OPERATOR MANUAL
Fixed RJ45 Copper Port
LED Indicators
SFP port
3-Way DIP switch
Power Connector
DOC ID: 10110603