Table of Contents
Advertisement
1 TECHNICAL SUMMARY
1.1
BRIEF DESCRIPTION
1.1.1
OVERVIEW
The OSD2151 is designed to convert between 10/100/1000Base-T copper cabling and 1000Base-Fx
fiber cabling with the added feature of Link Loss Forwarding. It has one RJ45 copper port and one SFP
port which can be specified by the user for one or two fiber configuration.
The OSD2151 incorporates Link Loss Forwarding (LLF) function providing fault detection and shut
down when a link fails.
The unit will operate on either singlemode or multimode fiber. Operation over at least 500m of
multimode fiber or 50km of singlemode fiber is possible by use of the appropriate optical devices.
A major benefit of the OSD2151 is its reliable operation over the -20°C to +65°C temperature range
which allows it to be used in environments such as roadside cabinets, mine sites and factories.
1.1.2
APPLICATIONS
▲
Any network utilising a mix of copper
and fiber
1.1.3
FEATURES AND BENEFITS
▲
Complies with
IEEE802.3i/802.3u/802.3ab
10/100/1000Base-T, IEEE802.3z
1000Base-Lx/Sx standards.
Supports network traffic of up to
▲
1000Mbps.
Has one fixed 10/100/1000BaseT
▲
copper port and one Gigabit SFP port
which may be either copper of fiber
Automatic MDI/MDIX setup: no need
▲
for crossover cables.
PAGE 5
OPTICAL SYSTEMS DESIGN
OSD2151 OPERATOR MANUAL
▲
Industrial IP communications
▲
Gigabit Ethernet backbone networks
▲
Can be used with either singlemode or
multimode fiber over a variety of link
budgets
Advanced features like Link Loss
▲
Forwarding to detect the link status of
link partners either on the fiber and/or
copper port.
▲
Available for operation over 1 or 2
fibers.
Powered by non critical 12V
▲
24V
supplies
AC
▲
Operates over the temperature range
of -20 to +65°C
DOC ID: 10110603
or
DC
Advertisement
Table of Contents
