Dura Heat EUH1500 Installation Instructions And Operators Manual page 5

Grounding Instructions:
Make sure the heater is switched OFF before plugging the
heater into the outlet. Connect to properly grounded outlets
only. Note: The power cord has a polarized plug (with one
blade wider than the other) that will only fit in a polarized outlet
one way. If it does not insert easily try reversing the plug. If it
still does not fit contact your electrician to replace your outlet.
DO NOT defeat the safety purpose of the polarized plug.
Automatic Overheat Safety Control
• This heater is equipped with an internal heat limiting thermostat and overheats protection circuit.
When a potential overheat temperature is reached, the system will automatically shut the heater off.
Unplug heater allow to cool down for 10 minutes, and then restart.
Cleaning and Maintenance
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician and
accordance with national and local codes.
• Before cleaning the appliance, disconnect it from the power outlet and let it cool down.
• In order to protect the enclosure, don't splash water onto the heater, and never use a solvent like
gasoline, isoamyl acetate, toluene, etc. to clean the heater. DO NOT open the heater or attempt to
clean the inside of this appliance.
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO SERVICEABLE PARTS INSIDE
~ 5 ~