Panasonic EW6011 Operating Instructions Manual page 9

Using the Low-Frequency Muscle and Nerve Stimulator
Program treatment
• Select where to attach the pads.
Program type
(Neck): Mainly rubs to gently loosen the neck.
(Shoulder): Firmly taps to loosen the shoulders.
(Joint): Relieves joint pain with fine vibrations.
(Waist): Loosens the large waist muscles with a grasping massage.
(Arm/Leg): Taps and grasps to loosen muscles.
(Sole): Mainly taps to massage away sole fatigue.
• If the attached position of the pads and the selected program are different, the program
may not be suitable for the position and the beneficial effect may not be obtained.
Be sure to select the program to match the position of the attached pads.
Changing the program
Repeatedly pressing the button changes the program and the selected program lamp flashes.
The program changes in this order:
When changing the treatment position
• Be sure to turn off the power then change the positions of the pads.
• Again turn on the power then select the desired program.
GB12
(cont.)
Press .
Manual treatment
Press .
• The tapping " " lamp flashes and the treatment begins.
• The program lamp turns off.
• Select the desired treatment type from tapping "
rubbing " ".
Changing the manual treatment
Repeatedly pressing the button changes the treatment type and the selected treatment lamp
flashes.
The treatment type changes in this order:
Switching the stimulus mode
• Switching the stimulus pattern for the treatment.
• Local: Treatment is performed alternately at the pad positions.
• Wide: Treatment is performed simultaneously at the pad positions.
Switching the stimulus mode
Repeatedly pressing the button changes the stimulus mode and the selected mode lamp lights.
The stimulus mode changes in this order:
Local Wide
• The stimulus mode does not change for the tapping treatment.
• When the stimulus mode is changed, the strength of the stimulus may feel different. In this case,
adjust the strength as desired.
", kneading " ", pressing " ", and
Press .
Press .
GB13