Installing Sim And Microsd™ Cards - Insignia 530 lte Quick Start Manual

Quick Start Guide - GB
Removing the back cover and battery
Remove the back cover by inserting a fingernail into the slot on the
bottom side of Your phone. Lift the cover up and away from the phone.
Taking out the battery: hold the side of device tightly with one hand and
pull out the battery with the other hand.
Installing SIM and microSD™ cards
a. SIM cards
The slot on the right is a GSM card slot. The slot on the left is a 3G
WCDMA card slot (compatible with a 2G card). Carefully slide the SIM
card into the socket, until the card locks into place. Make sure that
the card's gold contacts face into the phone. To remove the SIM card
carefully pull it out of the slot.
b. MicroSD ™ cards
Carefully slide the MicroSD ™ card into the socket, until the card locks
into place. Make sure that the card's gold contacts face into the phone.
To remove the MicroSD ™ card carefully pull it out of the slot.
Charging
Plug one end of the micro USB cable into the micro USB port on the
device and the power adapter into a standard AC power socket. A
discharged battery recharges fully in approximately 3.5 hours. Operating
the device while charging may extend the charging time.
3