Table of Contents
Advertisement
Shut Down
• Return throttles to neutral position.
• Turn key to off.
HYDRO-LOCK
Hydro-locking of an engine occurs when
water enters the engine cylinders. The
starter will click, but the engine won't
turn over.
Caused by
• Overloading the back deck.
• Large waves behind boat.
• Dropping lake level which increases
the angle of a beached boat.
If you suspect your engine has become
hydro-locked, get word to the nearest
marina and a technician will be sent out
help you.
RAISING ENGINE
Electric tilt toggle is located on the left
side of the engine, below the cowling
(cover).
Changing the Prop
• Remove keys from ignition
(to avoid someone else accidentally
starting the engine).
• Raise engine.
• Unscrew lock nut.
• Remove spacer washer.
• Remove Prop.
• Reverse procedure to install the
new propeller.
FLYING BRIDGE CONTROLS
Operation from Upper Deck
• Engines should be running.
• At the lower helm – put engine
control levers in neutral position.
• At the upper helm with the control
handles in neutral – push the "black
"transfer button.
• Red light will come on.
• Push throttle lever forward to go
forward or pull back for reverse.
4
Advertisement
Table of Contents
