Install The Water Bowl; Install The Cooking Grates; Mount The Temperature Gauge Assembly - Dyna-Glo DGY784BDP Installation Instructions Manual

ASSEMBLY INSTRUCTIONS

10. Install the water bowl.

Slide the water bowl (E) onto the cooking grate
supports inside the smoker body above the
wood chip box as shown.

11. Install the cooking grates.

Slide the 4 cooking grates (F) onto the top
cooking grate supports inside the smoker
body (I).

12. Mount the temperature gauge assembly.

Insert the probe of the temperature
gauge (L) through the middle hole of the
smoker door from the outside. Secure
with pre-assembled nut from inside
panel using wrench.
10
11
12
12
I
I
F
L
DD
E