Mazda mx-5 2016 Manual page 284

Interior Features
Bluetooth
®
4. Turn the audio control dial to select the
name of the device you would like to
link.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
5. Press the audio control dial to select the
device you would like to link. The
symbol disappears, and " PAIRING "
ashes in the audio display.
NOTE
When " GO BACK " is selected and the
audio control dial is pressed, the display
returns to " LINK CHANGE ".
6. If the link to the desired device is
successful, the symbol is displayed
again, together with " LINK
CHANGED ". " LINK CHANGED " is
displayed for three seconds, then it
returns to the normal display.
5–84
NOTE
Some Bluetooth audio devices need a
®
certain amount of time before the
symbol is displayed.
If a hands-free type mobile phone has
been the most recently paired device,
the Bluetooth ® unit links this device.
If you would like to use a Bluetooth
audio type device which has been
previously paired to the Bluetooth
the link must be changed to this device.
If an error occurs while trying to link
a device, " Err " ashes in the audio
display for three seconds, and the
display returns to " LINK CHANGE ".
If this occurs, check the pairing status
of the Bluetooth audio device and the
®
location of the device in the vehicle (not
in the trunk or a metal-type box), and
then try the link operation again.
Device selection can also be done using
voice recognition.
How to con rm the device currently
linked
Switch to the link-change mode. (Refer to
"Changing the link to a Bluetooth
device")
The device name displayed rst is the
device which is currently linked.
Deleting a device
1. Using the audio control dial, select the
pairing delete mode " PAIR DELETE "
in the " BT SETUP "mode. (Refer to
"Bluetooth audio device set-up" for
®
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the rst device among the
paired devices is displayed.
®
unit,
®
audio
®