LevelOne WAP-6101 Quick Installation Manual page 5

Other LED indicator:
LED Description
Change Master Mode / Slave Mode
When System is ready: (without click button.)
Status LED in Solid : In Master Mode
Status LED in Flash: In Slave Mode
1.Press Reset/WEC button 3 sec to trigger WEC or
Reset_WEC function; Status LED flash very fast during this
period
2. Press Reset/WEC button 5~10 sec till WiFi Dark then
Status
release Button to change Mode . Status LED flashes per
0.5 during this period.
3.Press Reset/WEC button 10 ~ 15sec WEC config status
release.
Status LED flashes per 1 sec during this period
4.Press Reset/WEC button 15 sec to reset to default. Status
LED will be blink during this period then device reboot.
Light Off: The device is power-off
Green in flash: data packet transferred.
Green in very flash per second during 2min:WPS PBC
status
When press Reset /WEC Button about 5~10 sec,then WiFi
WiFi LED will be dark about 20 sec then blink.
Dark: Wireless Radio is disable
LED in Slow flash: Wireless Connection doesn't establish.
LED in Solid : Wireless Connection established
successfully.
LAN LED in flash: data packet transferred
5