Murphy EG-05012B Specifications

Digital Auto-Start/Stop/Throttling
Engine Controller
Description
The eGUARD is a state-of-the-art controller. It will
meet virtually all of your engine-driven equipment
application requirements. The eGUARD has been
designed from the ground up to control today's elec-
tronic engines using J1939 and can easily control
the traditional non-electronic engines.
The eGUARD can be configured to automatically
or manually operate most types of applications,
from a simple start/stop sequence to complex auto-
matic throttling. Pumps, Compressors, Chippers,
Grinders and Power Units are just a few of the ideal
industrial applications for the eGUARD.
The eGUARD controller can maintain constant
pressure, flow or level by automatically increasing
or decreasing engine speed.
Warranty
A limited warranty on materials and workmanship is
given with this FW Murphy product.
A copy of the warranty may be viewed or printed by
going to www.fwmurphy.com/support/warranty.htm
eGUARD Controller
■
Compatible with Electronic (ECU)
and Standard (MPU) engines
■
J1939 Ready – works directly with our
MurphyLink J1939 PowerView gages
■
Automatic Speed Control - throttles
engine speed based on analog inputs
■
Engine Diagnostics – provides most
common descriptive faults when con-
nected to electronic engines
Features
Here are some of the unique features only Murphy's
eGUARD can offer you at our competitive price.
●
Throttling Input: The eGUARD can be config-
ured to control engine speed using most types of
analog input devices (0-5v, 1-5v or 4-20 mA).
●
Throttling Output: CANbus J1939* or incre-
ment/decrement relay pulse.
*
(when supported by the ECU manufacturer)
●
Compatibility: Accepts Magnetic Pick-up (MPU)
or ECU J1939 speed signals.
●
Field Configurable: Allows password protected
configuration changes through the keypad.
●
Field Programmable: Flash-based microprocessor
allows for easy upgrades or reconfigurations
using a PC or laptop.
●
Sealing: Maintains NEMA4 and IP65 rating when
properly mounted in a rated enclosure.
●
J1939 Ready; Works directly with Murphy's
J1939-ready PowerView gages, just plug and go,
no sender required.
eG-05012B page 1 of 2
Catalog Section 40
Standard Components
– 24 - Digital inputs
– 8 - Analog inputs (one battery dedicated)
– 1 - Magnetic pickup input
– 8 - 20A Form "C" relays
– 1 - RS232 port
– 1 - RS485 port
– 1 - RS232/RS485 port
– 1 - J1939 port
– 1 - 64 x 128 pixels full graphic
LCD display with backlight
– 1 - 12-position keypad
Optional Accessories
●
PVA Series Gages (Bulletin: PV-02125B)
●
Remote Relay Board
●
Mimic Annunciator allows for wired remote
operation and monitoring (Call Murphy IPD for
more information)
eG-05012B
Effective 03-05
(00-02-0593)