Setting The Date And Time - Ranger BN057 Instructions For Use Manual

LCD will flash "DATE".
2. Press the UP or DOWN button until both icons #4
and #5 are blinking, press OK to enter.
3. Press the UP or DOWN button to select #4
(Picture mode) or #5 (Video mode).
4. To select Video mode, press OK when #5 is
flashing. Videos are 15 seconds long and take up
to 20MB of memory each.
5. To select Picture mode, press OK when #4 is
flashing. Select between "1P" to take one photo at
a time or "3P" to take three photos. Press OK to
confirm.
6. The LCD will now display "LoHi" which indicates
the image resolution. "Lo" represents 0.8MP and
"Hi" represents 2.0MP. Press UP or DOWN to
select and press OK to confirm. Default is "Hi".
▲ Lo = 1024 x 768 pixels (0.8MP)
Hi = 1600 x 1200 pixels (2.0MP)
▲ Video is 15 seconds at 640x480 pixels (20Mb)
7. Press SETUP to save and exit.
6.3 S
ettIng the
Setting the Date, Year and Time. This information is
stored on each image along with the temperature and
moon phase.
d
ate
1. Enter setup mode as described on page 8. The
LCD will flash "DATE".
2. Press OK.
d t
ate and IMe
- 10 -