Mazda 2002 tribute Manual page 237

6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.
• If the oil level is between the MIN-MAX or ADD-FULL marks, the
oil level is acceptable. DO NOT ADD OIL.
• If the oil level is below the MIN or ADD mark, add enough oil to raise
the level within the MIN–MAX or ADD-FULL range.
• 2.0L DOHC I4 Zetec engine
• 3.0L DOHC V6 Duratec engine
• Oil levels above the MAX or FULL mark may cause engine damage.
Some oil must be removed from the engine by a service technician.
7. Put the indicator back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to Checking the engine
oil in this chapter.
2. If the engine oil level is not within the normal range, add only
certified engine oil of the recommended viscosity. Remove the engine
oil filler cap and use a funnel to pour the engine oil into the opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
MAX or FULL mark on the engine oil level indicator (dipstick).
Maintenance and Specifications
237