Specifications; Amplifier; Bluetooth; General Information - Philips DS3600 User Manual

5 Specifications

Note
•
Product information is subject to change without prior
notice.

Amplifier

Rated Output Power
Signal to Noise Ratio
Aux-in Link

Bluetooth

Standard
Output power
Frequency band
Range

General information

AC Power
Operation Power
Consumption
Standby Power
Consumption
Max. load for iPod/
iPhone/iPad
Dimensions
- Main Unit
(W x H x D)
Weight
- Main Unit
- With Packing
EN
11
2 X 10 W RMS
> 62 dBA
500mV RMS
Bluetooth Standard
Version 2.1+EDR
0 dBm (Class 2)
2.402 ~ 2.480
GHzISM Band
10 m (free space)
Model: AS300-120-
AI250 (Philips);
Input: 100-240 V ~,
50/60Hz, 1.1A;
Output: 12 V
2 5 A
15 W
<0 5 W
5 V 2.1 A
285 x 136 x 143 mm
1 2 kg
2.0 kg

6 Troubleshooting

Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
(www.philips.com/support). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
• Ensure that the AC power plug of the unit
is connected properly.
•
Ensure that there is power at the AC
outlet.
No sound or poor sound
• Adjust the volume of your docking speaker.
•
Adjust the volume of your iPod/iPhone/
iPad, Bluetooth devices or other external
devices.
No response from the unit
• Disconnect and reconnect the AC power
plug, then turn on the unit again.
Cannot sync with PC
•
Switch the docking speaker to standby
mode.
•
Try another USB cable.
• Install iTunes in PC properly.