Table of Contents
Advertisement
Knowing Your Mazda
Doors and Locks
Replacing the transmitter battery
1. Insert a small screwdriver into the slot
and gently pry open the transmitter.
Slot
2. Press the portion of the battery
indicated by A and remove the battery.
A
3-6
Back cover
3. Install a new battery (CR2025 or the
equivalent) into the front portion of the
holder with the positive pole ( )
facing up. Press on the B portion of the
battery to set the battery.
B
Front
cover
CAUTION
Do not press any buttons when
replacing the battery. The electronic
code could be altered and cause the
keyless entry system to malfunction.
If the keyless entry system fails to
operate, contact an Authorized Mazda
Dealer.
4. Align the front and back covers and
snap the transmitter shut.
Back cover
Front of
holder
Advertisement
Chapters
Table of Contents
