Mazda 2003 Tribute Owner's Manual
  1. Manuals
  2. Brands
  3. Mazda Manuals
  4. Automobile
  5. 2003 Tribute
  6. Owner's manual

Mazda 2003 Tribute Owner's Manual

Hide thumbs Also See for 2003 Tribute:
Table of Contents

Advertisement

Quick Links

See also: Quick Tips

Table of Contents

17
44
48
56
69
79
108
3
8
10
15
17
27
44
48
50
51
56
58
60
61
62
69
69
74
79
89
99
1

Advertisement

Table of Contents
loading

Related Manuals for Mazda 2003 Tribute

Summary of Contents for Mazda 2003 Tribute

  • Page 1: Table Of Contents

    Introduction Instrument Cluster Warning and control lights Gauges Entertainment Systems AM/FM stereo with CD AM/FM stereo with cassette and in-dash six CD Climate Controls Manual heating and air conditioning Lights Headlamps Turn signal control Bulb replacement Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors...
  • Page 2 Mazda Motor Corporation. Mazda may change the contents without notice and without incurring obligation. Copyright © 2002 Mazda Motor Corporation...

  • Page 3: Introduction

    The more you know and understand about your vehicle the greater the safety and pleasure you will derive from driving For more information on Mazda Motor Corporation and its products visit the following website: In the United States: www.mazdausa.com In Canada: www.mazda.ca...
  • Page 4 Introduction SAFETY AND ENVIRONMENT PROTECTION Warning symbols in this guide How can you reduce the risk of personal injury and prevent possible damage to others, your vehicle and its equipment? In this guide, answers to such questions are contained in comments highlighted by a bold WARNING statement. These comments should be read and observed.
  • Page 5 This information may be stored during regular operation or in a crash or near crash event. This stored information may be read out and used by: Mazda Motor Company. service and repair facilities. law enforcement or government agencies.
  • Page 6 Introduction These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert Protecting the Environment Air Bag-Front Child Seat Child Seat Lower Anchor Brake System Brake Fluid - Non-Petroleum Based Master Lighting Switch Fog Lamps-Front Fuel Pump Reset Windshield Defrost/Demist...
  • Page 7 Passenger Compartment Air Filter Check fuel cap INFORMATION ABOUT THIS GUIDE The information found in this guide was accurate at the time of printing. Mazda may change the contents without notice. Introduction Power Window Lockout Engine Oil Engine Coolant Temperature...

  • Page 8: Instrument Cluster

    Instrument Cluster Headlamp and turn signal control (pg. 48) Fog lamp control* (pg. 48) Power mirror Speed controls* control* (pg. 62) (pg. 61) Instrument panel dimmer/dome light control (pg. 49) Hood release handle (pg. 198) * if equipped Windshield wiper/washer control (pg.
  • Page 9 Instrument Cluster Rear window defroster Hazard flasher control Audio system control (pg. 155) (pg. 17) (pg. 47) 4WD control* (pg. 137) Cigarette lighter Climate controls (pg. 44) Auxiliary power point (pg. 59) *if equipped...

  • Page 10: Warning And Control Lights

    Instrument Cluster WARNING LIGHTS AND CHIMES CHECK FUEL Warning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works.
  • Page 11 2. Poor fuel quality or water in the fuel. 3. The fuel cap may not have been properly installed and securely tightened. These temporary malfunctions can be corrected by filling the fuel tank with high quality fuel of the recommended octane and/or properly installing and securely tightening the fuel cap.
  • Page 12 Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately by an authorized Mazda dealer. WARNING: Driving a vehicle with the brake system warning light on is dangerous.
  • Page 13 Instrument Cluster Air bag readiness: If this light fails to illuminate when ignition is turned to ON, continues to flash or remains on, have the system serviced immediately. A chime will also sound when a malfunction in the supplemental restraint system has been detected.
  • Page 14 Instrument Cluster Four wheel drive indicator (if equipped): Illuminates when four-wheel drive is engaged, refer to the Driving chapter. Note: If the light continues to flash, have the system serviced. Anti-theft system: Flashes when the Securilock Passive Anti-theft System has been activated. Refer to SecuriLock passive anti-theft system in the Locks and Security chapter.

  • Page 15: Gauges

    GAUGES CHECK FUEL Speedometer: Indicates the current vehicle speed. Engine coolant temperature gauge: Indicates engine coolant temperature. At normal operating temperature, the needle will be in the normal range (between “H” and “C”). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine and let the engine cool.
  • Page 16 Instrument Cluster Odometer: Registers the total kilometers (miles) of the vehicle. Trip odometer: Registers the kilometers (miles) of individual journeys. Press and hold the button for 1 or more seconds to reset. Press and release the button in less than 1 second to toggle between odometer and trip odometer. Tachometer: Indicates the engine speed in revolutions per minute.

  • Page 17: Entertainment Systems

    Entertainment Systems AM/FM RADIO WITH COMPACT DISC PLAYER Volume/power control Ensure that the ignition is either in the ACC or ON position for the audio system to function. Press the control to turn the audio system on or off. Turn the control to raise or lower the volume.
  • Page 18 Entertainment Systems AM/FM select Ensure that the ignition is in the ACC or ON position for the radio to operate. Press the AM or FM1/2 control to enter radio mode. Band selection Select AM by pressing the AM button and FM1 or FM2 by pressing the FM1/2 button.
  • Page 19 Turn the TUNE control to the left for a lower frequency. Turn the TUNE control to the right for a higher frequency. Scan function The scan function works in radio and CD mode. Scan function in radio mode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band.
  • Page 20 Entertainment Systems Treble adjust The treble adjust control allows you to increase or decrease the audio system’s treble output. Press the audio control until TREB is displayed. Turn the control to increase (right) or decrease (left) the amount of treble output. Bass adjust The bass adjust control allows you to increase or decrease the audio system’s bass output.
  • Page 21 Entertainment Systems Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. Press the audio control until FADE appears. Turn the control (right or left) to adjust between the front and rear speakers. Speaker balance adjust Speaker sound distribution can be adjusted between the right and left speakers.
  • Page 22 Entertainment Systems Press the audio control until MID appears in the display. Turn the control to the right to increase the mid-range. Turn the control to the left to decrease the mid-range. The level will display. Release the TUNE control when the desired level is reached.
  • Page 23 Starting autoset memory preset 1. Press the AM or FM1/2 control to select a frequency. 2. Press and momentarily hold the AUTO-M (Auto memory) control. The system will beep. 3. When the first six strong stations are filled, the strongest station will start playing.
  • Page 24 Entertainment Systems Press the VOL (Volume) control to stop cassette play. CD select To begin CD play: 1. Insert a CD into the slot, label side up. The system will auto-load the CD and begin play after a short pause. The disc number and the track number will illuminate in the display.
  • Page 25 Track search Track search works in CD mode. Press the on the TRACK control to skip forward to the beginning of the next track. Press the on the TRACK control to skip back to the beginning of the current track. Disc search Disc search works in CD mode.
  • Page 26 Entertainment Systems Random play in CD mode Press the RDM control during play. RDM will illuminate in the display. The next selection will be randomly selected. To disengage random play, press the RDM control again. Setting the clock The clock can be set at any time when the ignition switch is in the ACC or ON position.

  • Page 27: Am/Fm Stereo With Cassette And In-Dash Six Cd

    Entertainment Systems Press the CLOCK control to alternate the display. NOTE: If the audio operation is selected while the clock mode is on, the selected audio mode will be displayed for ten seconds, then the display will revert to the clock mode. AM/FM RADIO WITH CASSETTE TAPE AND COMPACT DISC PLAYER/CHANGER (IN-DASH CD CHANGER) Volume/power control...
  • Page 28 Entertainment Systems Turn the control to raise or lower the volume. NOTE: To prevent the battery from being discharged, do not leave the audio system on for a long period when the engine is not running. NOTE: Once the system is turned off, press the VOL control again to listen to the frequency last tuned to.
  • Page 29 Entertainment Systems Press the TUNE control to select the desired function. Turn the TUNE control to adjust the desired levels. Refer to Treble adjust for specific instructions on level adjustments. The TUNE control will also work in radio mode to manually increase or decrease the frequency.
  • Page 30 Entertainment Systems NOTE: If the unit is left in scan mode, normal play will resume where scan was selected. Seek function The seek function control works in radio mode. Seek function in radio mode Press and momentarily hold the SEEK control. Press to find the next listenable station up the...
  • Page 31 Entertainment Systems Press the audio control until BASS appears. Turn the control to increase (right) or decrease (left) the amount of bass output. Speaker fade adjust Speaker sound can be adjusted between the front and rear speakers. Press the audio control until FADE appears.
  • Page 32 Entertainment Systems Press the audio control until BAL appears. Turn the control (right or left) to adjust between the right and left speakers. Mid-range adjust (if equipped) Your vehicle may be equipped with a mid-range adjust. The TUNE control allows you to adjust the mid-range levels. Press the audio control until MID appears in the display.
  • Page 33 Radio station memory preset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and 12 FM stations (six in FM1 and six in FM2). Setting memory preset stations 1.
  • Page 34 Entertainment Systems NOTE: If the power supply is interrupted, (fuse blows or the battery is disconnected), the preset channels will be canceled. Tape select (if equipped) To begin tape play, insert a cassette tape into the cassette slot, with the open edge facing the right.
  • Page 35 Tape direction select Press the PROG RDM control to play the alternate side of a tape. NOTE: When the end of the cassette is reached, the audio system will automatically reverse play. Repeat play The repeat play feature works in tape and CD modes and allows you to listen to a selection repeatedly.
  • Page 36 Entertainment Systems Track search Track search works in CD mode. Press the on the TRACK control to skip forward to the beginning of the next track. Press the on the TRACK control to skip back to the beginning of the current track.
  • Page 37 APC in tape mode Press the APC control to advance to the beginning of the next selection. Press the APC control to reverse to the beginning of the current selection. To disengage APC, press the APC control again. If APC detects 15 seconds of blank space, it will automatically advance the tape to the next selection.
  • Page 38 Entertainment Systems Inserting CDs into desired tray number 1. Press and hold the LOAD control until a beep is heard. 2. Press the memory preset control for the deisred CD tray within 5 seconds after the beep is heard. 3. When IN is displayed, insert the CD. NOTE: The CD cannot be inserted to the desired tray number if the number is already occupied.
  • Page 39 Multiple ejection 1. Press and hold the CD eject control for approximately 2 seconds until a beep is heard. 2. Wait approximately 5 seconds or press the CD eject control again within 5 seconds after the beep is heard. 3. Remove the CD. The next CD will then be ejected. NOTE: Cds will be ejected in numerical order, lowest number first.
  • Page 40 Entertainment Systems 2. Press SCAN on the hour set control to adjust the hours. 3. Press AUTO-M on the minute set control to adjust the minutes. 4. Press the CLOCK control again to start the clock. NOTE: If the power supply to the unit is interrupted (if the fuse blows or the vehicle’s battery is disconnected), the clock will need to be reset.
  • Page 41 Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Mazda CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player.
  • Page 42 (4.75 in) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Mazda CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player.
  • Page 43 Radio reception factors Three factors can affect radio reception: Distance/strength. The further an FM signal travels, the weaker it is. The listenable range of the average FM station is approximately 40 km (24 miles). This range can be affected by “signal modulation.” Signal modulation is a process radio stations use to increase their strength/volume relative to other stations.

  • Page 44: Climate Controls

    Climate Controls MANUAL HEATING AND AIR CONDITIONING SYSTEM Fan speed control Controls the volume of air circulated in the vehicle. Temperature control knob Controls the temperature of the airflow inside the vehicle. Mode selector control Controls the direction of the airflow to the inside of the vehicle.
  • Page 45 Climate Controls MAX A/C- Uses recirculated air to cool the vehicle. MAX A/C is noisier than A/C but more economical and will cool the inside of the vehicle faster. Airflow will be from the instrument panel registers. This mode can also be used to prevent undesirable odors from entering the vehicle.
  • Page 46 Climate Controls Operating tips In humid weather conditions, place the climate control system in Defrost mode before driving. This will reduce fogging on your windshield. Once the windshield has been cleared, operate the climate control system as desired. To reduce humidity buildup inside the vehicle in cold weather conditions, don’t drive with the climate control system in the OFF or MAX A/C position.
  • Page 47 4. Direct the outer panel vents towards the side windows. 5. To increase airflow to the outer panel vents, close the central panel vents. WARNING: Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop.

  • Page 48: Lights

    Lights HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. Turns the headlamps on. BATTERY SAVER Your vehicle is equipped with a battery saver feature which, if you leave the headlamps on, automatically turns off the headlamps after 30 seconds when the ignition is in the OFF position.
  • Page 49 High beams After turning the headlamps on, push the lever toward the instrument panel to activate. Pull the lever towards you to deactivate. Flash to pass Pull toward you slightly to activate and release to deactivate. INSTRUMENT PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel.

  • Page 50: Turn Signal Control

    The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident the alignment of your headlamps should be checked by your authorized Mazda dealer. TURN SIGNAL CONTROL Push down to activate the left turn signal.

  • Page 51: Bulb Replacement

    Check the operation of the following interior bulbs frequently: interior overhead lamp map lamp For bulb replacement, see an authorized Mazda dealer. Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America to assure lamp performance, light brightness and pattern and safe visibility.
  • Page 52 To replace all instrument panel lights - see your dealer. Replacing headlamp bulbs NOTE: This procedure can be difficult. Your Mazda dealer has the proper tools, training and parts to perform this task. If you have difficulty with this procedure, visit your local Mazda dealer.
  • Page 53 Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hands could cause the bulb to break the next time the headlamps are operated. Always wear safety glasses while handling bulbs.
  • Page 54 Lights 5. Pull the bulb straight out of the socket and push in the new bulb. 6. To complete installation, follow the removal procedure in reverse order. Replacing front parking/turn signal lamp bulbs 1. Make sure that the headlamp control is in the OFF position. 2.
  • Page 55 4. Install the bulb socket in lamp assembly turning it clockwise, 5. Install the lamp assembly on liftgate with two screws. Replacing high-mount brake lamp bulbs For bulb replacement, see an authorized Mazda dealer. Lights...

  • Page 56: Driver Controls

    Driver Controls MULTI—FUNCTION LEVER Windshield wiper: For intermittent operation, move control down one position. Adjust the rotary control to the desired speed setting. For normal or low speed wiper operation, move control down two positions from OFF. For high speed wiper operation, move control down three positions from OFF.
  • Page 57 For normal speed rear wiper operation, rotate control upward to To activate the rear washer, rotate the control to the position and release. Windshield wiper blades Check the wiper blades for wear at least twice a year or when they seem less effective.

  • Page 58: Steering Wheel Adjustment

    Driver Controls MANUAL TILT STEERING COLUMN To adjust the steering wheel: 1. Pull down and hold the steering wheel release control toward you. 2. Move the steering wheel up or down until you find the desired location. 3. Pull the steering wheel release control up.
  • Page 59 Installing a garage door opener (if equipped) The storage compartment can be converted to accommodate a variety of aftermarket garage door openers: Remove the Velcro pad from the storage compartment door. Place Velcro on aftermarket transmitter opposite of actuator control. Install the transmitter on to storage compartment door aligning the actuator control with...

  • Page 60: Power Windows

    Driver Controls CARGO AREA AUXILIARY POWER POINT An additional auxiliary power point is located in the cargo area. WARNING: Power outlets are designed for accessory plugs only. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty.

  • Page 61: Mirrors

    To lock out all the window controls except for the driver’s window press the right side of the control. NOTE: The window switches will not illuminate when the window control is in the LOCKED position. Press the left side to restore the window controls. Accessory delay With accessory delay, power windows and moonroof operate for up to ten minutes after the ignition switch is turned from the ACC or ON to...

  • Page 62: Speed Control (Cruise Control)

    Driver Controls Fold-away mirrors Pull the side mirrors in carefully when driving through a narrow space, like an automatic car wash. Heated outside mirrors Both mirrors are heated automatically to remove ice, mist and fog when the rear window defrost is activated. Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror...
  • Page 63 Setting speed control The controls for using your speed control are located on the steering wheel for your convenience. 1. Press the ON control and release it. 2. Accelerate to the desired speed. 3. Press the SET ACC control and release it.
  • Page 64 Driver Controls Resuming a set speed Press the RSM (resume) control and release it. This will automatically return the vehicle to the previously set speed. The RSM control will not work if the vehicle speed is not faster than 48 km/h (30 mph). Increasing speed while using speed control There are two ways to set a higher speed:...
  • Page 65 Depress the brake pedal until the desired vehicle speed is reached, press the SET ACC control. Turning off speed control There are two ways to turn off the speed control: Depress the brake pedal or the clutch pedal (if equipped). This will not erase your vehicles previously set speed.
  • Page 66 Driver Controls MOON ROOF (IF EQUIPPED) To operate the moon roof: The moon roof is equipped with an automatic, one-touch, express opening feature. Press and release the rear portion of the control. To stop motion at any time during the one-touch opening, press the control a second time.
  • Page 67 To install the shade: Insert the ends of the cargo shade into the mounting features located behind the rear seat on the rear trim panels. To operate the shade: 1. Grasp the pull tube at the rearward edge of the shade and pull rearward.
  • Page 68 Driver Controls WARNING: Make sure that the liftgate door and/or window are closed to prevent exhaust fumes from being drawn into the vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate door or window open, keep the vents open so outside air comes into the vehicle.

  • Page 69: Locks And Security

    KEYS The key operates all locks on your vehicle. In case of loss, replacement keys are available from your dealer. You should always carry a second key with you in a safe place in case you require it in an emergency. Refer to SecuriLock Passive Anti-Theft System for more information.
  • Page 70 Locks and Security Locking the doors 1. Turn the key in the door cylinder to lock all the doors. The park lamps will flash once and the perimeter alarm (if equipped) will be start the arming process. For more information concerning the perimeter alarm, refer to Perimeter alarm system (if equipped) later in this chapter.
  • Page 71 REMOTE ENTRY SYSTEM (IF EQUIPPED) This device complies with part 15 of the FCC rules and with RS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 72 Locks and Security Locking the doors 1. Press and release to lock all the doors. The park lamps will flash once and the perimeter alarm (if equipped) will be start the arming process. For more information concerning the perimeter alarm, refer to Perimeter alarm system (if equipped) later in this chapter.
  • Page 73 If you would like to have your remote entry transmitter reprogrammed because you lost one, or would like to buy additional remote entry transmitters, you can either reprogram them yourself, or take all remote entry transmitters to your authorized Mazda dealer for reprogramming. How to reprogram your remote entry transmitters You must have all remote entry transmitters (maximum of four) available before beginning this procedure.

  • Page 74: Anti-Theft System

    The SecuriLock passive anti-theft system is not compatible with non-Mazda aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Your vehicle comes with two coded keys; additional coded keys may be purchased from your dealer.
  • Page 75 If a problem occurs with the SecuriLock rapidly or glow steadily when the ignition is in the ON position. If this occurs, the vehicle should be taken to an authorized Mazda dealer for service. Automatic arming...
  • Page 76 You must have two previously programmed coded keys (keys that already operate your vehicle’s engine) and the new unprogrammed key(s) readily accessible. If you do not have at least 2 previously programmed keys, you must take your vehicle to your authorized Mazda dealer to have the spare key(s) programmed.
  • Page 77 If failure repeats, bring your vehicle to your authorized Mazda dealer to have the new key(s) programmed. To program additional new unprogrammed key(s), repeat this procedure from step 1 for each additional key.
  • Page 78 Locks and Security PERIMETER ALARM SYSTEM (IF EQUIPPED) The perimeter anti-theft system will help prevent your vehicle from unauthorized entry. If there is any potential perimeter anti-theft problem with your vehicle, ensure ALL remote entry transmitters are taken to the dealership to aid in troubleshooting.

  • Page 79: Seating And Safety Restraints

    Seating and Safety Restraints SEATING Adjusting the front manual seat WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. Sudden braking or a collision could cause serious injury. Adjust the seat only when the vehicle is stopped. WARNING: Do not pile cargo higher than the seatbacks to reduce the risk of injuring people in a collision or sudden stop.
  • Page 80 Seating and Safety Restraints Adjustable head restraints (if equipped) The purpose of these head restraints is to help limit head motion in the event of a rear collision. To properly adjust your head restraints, lift the head restraint so that it is located directly behind your head or as close to that position as possible.
  • Page 81 Seating and Safety Restraints Adjusting the front power seat (if equipped) WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a collision.
  • Page 82 Seating and Safety Restraints Heated seats (if equipped) To operate the heated seats: Push the control located on the seat to activate. Push again to deactivate. The heated seats will activate when the ignition is in the RUN position. When activated, they will turn off automatically after 10 minutes or when the ignition is turned to the OFF position.
  • Page 83 Seating and Safety Restraints Push control to lower head restraint. Folding down rear seats (60/40 split bench) 1. Raise the rear seat head restraint and remove. 2. Place the head restraints under the front passenger seat for storage. 3. Pull the seat release control.
  • Page 84 Seating and Safety Restraints 4. Flip seat forward. 5. Pull the seatback release strap toward the front seat. Make sure the seat belt buckle heads are fully extended towards the front of the vehicle and are away from the seatback. NOTE: When the seatback release strap is pulled use your other hand to guide the seatback.
  • Page 85 Seating and Safety Restraints NOTE: Make sure the floor is clear of all objects before folding the seatback. Returning the rear seats to upright position 1. Pull seatback up and into upright position making sure seatback locks into place. While holding the seatback, pull the release and push seatback backward into the desired...
  • Page 86 Seating and Safety Restraints To remove the rear cushion 1. Pull the Yellow tab 2. Pull the cushion to the outboard side of the vehicle. To install the rear cushion 1. Push the cushion to the inboard side of the vehicle. 2.
  • Page 87 Seating and Safety Restraints 3. Pull the seat release control on each side of the seat to release the locks. 4. Flip seat forward. 5. Pull the seatback release strap toward the front seat. Make sure the seat belt buckle heads are fully extended towards the front of the vehicle and are away from the seatback.
  • Page 88 Seating and Safety Restraints Returning the rear seats to upright position 1. Pull seatback up and into upright position making sure seatback locks into place. 2. Rotate seat cushion down into the seating position making sure that the seat cushion is locked into place and that the seat belt buckles are exposed.

  • Page 89: Safety Restraints

    Seating and Safety Restraints To install the rear cushion 1. Push the cushion so that the rods fit into the locking tabs. 2. Make sure that the hinges are locked into place. SAFETY RESTRAINTS Safety restraints precautions WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips.
  • Page 90 Seating and Safety Restraints WARNING: In a rollover crash, an unbelted person is significantly more likely to die or be seriously injured than a person wearing a seat belt. WARNING: Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair.
  • Page 91 Seating and Safety Restraints WARNING: BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if the safety belt assembly “automatic locking retractor” feature or any other safety belt function is not operating properly when checked according to the procedures in Workshop Manual. WARNING: Failure to replace the Belt and Retractor assembly could increase the risk of injury in collisions.
  • Page 92 Seating and Safety Restraints sharply, or the vehicle receives an impact of approximately 8 km/h (5 mph) or more, the combination safety belts will lock to help reduce forward movement of the driver and passengers. Automatic locking mode (outboard front passenger seating position only) for use with child safety seats The automatic locking mode is not available on the driver safety belt.
  • Page 93 WARNING: After any vehicle collision, the front passenger outboard seat belt system must be checked by an authorized Mazda dealership to verify that the “automatic locking retractor” feature for child seats is still functioning properly. In addition, all seat belts should be checked for proper function.
  • Page 94 Seating and Safety Restraints WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision. Safety belt pretensioner Your vehicle is equipped with safety belt pretensioners at the driver and front passenger seating positions.
  • Page 95 WARNING: Improper disposal of the pretensioner system or a vehicle with non-deactivated pretensioners is dangerous. Unless all safety procedures are followed, injury could result. Ask an authorized Mazda Dealer how to safely dispose of the pretensioner system or how to scrap a front pretensioner-equipped vehicle.
  • Page 96 Seating and Safety Restraints To tighten the belt, pull the loose end of the belt through the tongue until it fits snugly across the hips. Shorten and fasten the belt when not in use to keep the belt away from door openings and available after unfolding the seats. Safety belt warning light and indicator chime The safety belt warning light illuminates in the instrument cluster and a chime sounds to remind the occupants to fasten their safety belts.
  • Page 97 Seating and Safety Restraints Reasons given... Consider... Crashes are rare 36,700 crashes occur every day. The more we events drive, the more we are exposed to rare events, even for good drivers. 1 in 4 of us will be seriously injured in a crash during our lifetime.
  • Page 98 Mazda recommends that all safety belt assemblies used in vehicles involved in a collision be replaced. However, if the collision was minor and an authorized Mazda technician finds that the belts do not show damage and continue to operate properly, they do not need to be replaced.

  • Page 99: Air Bags

    Seating and Safety Restraints AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) RPM X 1000 km/h Important supplemental restraint system (SRS) precautions The supplemental restraint system is designed to work with the safety belt to help protect the driver and right front passenger from certain upper body injuries.
  • Page 100 Do not modify the front end of the vehicle. WARNING: Additional equipment may effect the performance of the air bag sensors increasing the risk of injury. Consult your authorized Mazda dealership before installation of additional equipment.
  • Page 101 Seating and Safety Restraints Children and air bags For additional important safety information, read all information on safety restraints in this guide. WARNING: Children must always be properly restrained. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position.
  • Page 102 Seating and Safety Restraints The air bags inflate and deflate rapidly upon activation. After air bag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (e.g., baking soda) that result from the combustion process that inflates the...
  • Page 103 WARNING: Disposing of an air bag can be dangerous. Unless all safety procedures are followed, injury can result. Ask an Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air bag equipped vehicle.
  • Page 104 Seating and Safety Restraints Side air bag system (if equipped) WARNING: Do not place objects or mount equipment on or near the air bag cover on the side of the seatbacks of the front seats or in front seat areas that may come into contact with a deploying air bag.
  • Page 105 WARNING: Disposing of an air bag can be dangerous. Unless all safety procedures are followed, injury can result. Ask an Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air bag equipped vehicle.
  • Page 106 Seating and Safety Restraints WARNING: All occupants of the vehicle including the driver should always wear their safety belts even when an air bag SRS is provided. How does the side air bag system work? The side air bag system consists of the following: An inflatable nylon bag (air bag) with a gas generator concealed...
  • Page 107 Disposal of air bags and air bag equipped vehicles For disposal of safety belt pretensioners, air bags, or air bag equipped vehicles, see your authorized Mazda dealership. Air bags MUST BE disposed of by qualified personnel.

  • Page 108: Child Restraints

    WARNING: Disposing of an air bag can be dangerous. Unless all safety procedures are followed, injury can result. Ask an Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air bag equipped vehicle.
  • Page 109 To improve the fit of both the lap and shoulder belt on children who have outgrown child safety seats, Mazda recommends use of a belt-positioning booster. Booster seats position a child so that safety belts fit better. They lift the child up so that the lap belt rests low across the hips and the knees bend comfortably.
  • Page 110 Seating and Safety Restraints Booster seats should be used until you can answer YES to ALL of these questions: Can the child sit all the way back against the vehicle seat back with knees bent comfortably at the edge of the seat without slouching? Does the lap belt rest low across the hips?
  • Page 111 Seating and Safety Restraints Both can be used in any vehicle in a seating position equipped with lap/shoulder belts if your child is over 40 lbs. The shoulder belt should cross the chest, resting snugly on the center of the shoulder. The lap belt should rest low and snug across the hips, never up high across the stomach.
  • Page 112 Seating and Safety Restraints SAFETY SEATS FOR CHILDREN Child and infant or child safety seats Use a safety seat that is recommended for the size and weight of the child. Carefully follow all of the manufacturer’s instructions with the safety seat you put in your vehicle. If you do not install and use the safety seat properly, the child may be injured in a sudden stop or collision.
  • Page 113 Put the safety belt in the automatic locking mode. Refer to Automatic locking mode (passenger side front seat). Mazda recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position which is capable of providing a tether anchorage.
  • Page 114 Seating and Safety Restraints 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together. 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions.
  • Page 115 Seating and Safety Restraints 5. To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. 6. Allow the belt to retract. The belt will click as it retracts to indicate it is in the automatic locking mode.
  • Page 116 Seating and Safety Restraints Check to make sure the child seat is properly secured before each use. Attaching child safety seats with tether straps Most new forward-facing child safety seats include a tether strap which goes over the back of the seat and hooks to an anchoring point. Tether straps are available as an accessory for many older safety seats.
  • Page 117 Seating and Safety Restraints 3. Locate the correct anchor for the selected seating position. NOTE: There are three tether anchors located on the headliner at the rear of the vehicle. WARNING: If the tether strap is clipped incorrectly, the child safety seat may not be retained properly in the event of a collision.
  • Page 118 Seating and Safety Restraints Attaching safety seats with LATCH (Lower Anchors and Tethers for Children) attachments for child seat anchors Some child safety seats have two rigid or webbing mounted attachments that connect to two anchors at certain seating positions in your vehicle. When properly installed, this type of seat eliminates the need to use seat belts to attach the child seat.
  • Page 119 Seating and Safety Restraints The lower anchors for child seat installation are located at the rear section of the rear seat between the cushion and seat back. Follow the child seat manufacturer’s instructions to properly install a child seat with LATCH attachments. WARNING: Attach LATCH lower attachments of the child seat only to the anchors shown.

  • Page 120: Driving

    Driving STARTING Positions of the ignition 1. LOCK, locks the gearshift lever and allows key removal. 2. ACCESSORY, allows the electrical accessories such as the radio to operate while the engine is not running. 3. ON, all electrical circuits operational. Warning lights illuminated.
  • Page 121 (RPM). When the engine starts, the idle RPM runs higher than normal in order to warm the engine. If the engine idle speed does not slow down automatically, have the vehicle checked by your authorized Mazda dealership. Before starting the vehicle: 1.
  • Page 122 Driving If starting a vehicle with a manual transmission: Make sure the parking brake is set. Push the clutch pedal to the floor. 3. Turn the key to 3 (ON) without turning the key to 4 (START). BRAKE CHECK FUEL Make sure the corresponding lights illuminate or illuminate briefly.
  • Page 123 1. Turn the key to 4 (START) without pressing the accelerator pedal and release as soon as the engine starts. The key will return to 3 (ON). 2. If the temperature is above –12°C (10°F) and the engine does not start within five seconds on the first try, turn the key to OFF, wait 10 seconds and try again.

  • Page 124: Brakes

    Driving WARNING: If you ever smell exhaust fumes of any kind inside your vehicle, have your authorized Mazda dealer inspect and fix your vehicle immediately. Do not drive if you smell exhaust fumes. These fumes are harmful and result in accident or death.
  • Page 125 If a “metal-to-metal,” “continuous grinding” or “continuous squeal” sound is present while braking, the brake linings may be worn-out and should be inspected by an authorized Mazda dealership. Four-wheel anti-lock brake system (ABS) (if equipped)
  • Page 126 (If your brake warning lamp illuminates, have your vehicle serviced immediately by an authorized Mazda dealership.) Using four wheel ABS (if equipped) In an emergency or when maximum efficiency from the ABS is required, apply continuous force on the brake.
  • Page 127 The BRAKE warning lamp in the instrument cluster illuminates and remains illuminated (when the ignition is turned ON) until the parking brake is released. WARNING: Always set the parking brake fully and make sure that the gearshift is securely latched in P (Park) (automatic transmission) or in 1 (First Gear) (manual transmission).

  • Page 128: Transmission Operation

    Driving PREPARING TO DRIVE YOUR VEHICLE WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. WARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Your vehicle has special design and equipment features to make it capable of performing in a wide variety of circumstances.
  • Page 129 If you cannot move the gearshift lever out of P (Park) with ignition in the ON position and the brake pedal depressed: 1. Apply the parking brake, turn ignition key to LOCK, then remove the key. 2. Locate the access cover plate to the brake-shift interlock override.
  • Page 130 WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized Mazda dealership. Driving with an automatic overdrive transaxle Your automatic transaxle electronically controls the shift feel by using an adaptive learning strategy.
  • Page 131 Understanding gearshift positions P (Park) Always come to a complete stop before shifting into P (Park). Make sure the gearshift lever is securely latched in P (Park). This locks the transaxle and prevents the front wheels from rotating. WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park).
  • Page 132 O/D OFF control is pressed, there may be a transaxle electronic system malfunction. You should contact your authorized Mazda dealer as soon as possible or damage to the transaxle could occur.
  • Page 133 O/D OFF control is pressed, there may be a transaxle electronic system malfunction. You should contact your authorized Mazda dealer as soon as possible or damage to the transaxle could occur.
  • Page 134 Driving Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur. Do not rock the vehicle for more than a minute or damage to the transmission and tires may occur, or the engine may overheat. MANUAL TRANSAXLE OPERATION (IF EQUIPPED) USING THE CLUTCH Vehicles equipped with a manual transaxle have a starter interrupt...
  • Page 135 4. Without depressing the accelerator pedal, turn the ignition to position 4 (START), release the ignition as soon as the engine starts. 5. Let the engine idle for a few seconds. 6. Release the brake pedal, then slowly release the clutch pedal while pressing down slowly on the accelerator pedal.
  • Page 136 Driving REVERSE Make sure that your vehicle is at a complete stop before you shift into R (Reverse). Failure to do so may damage the transaxle. Put the gearshift lever into the neutral position and wait at least three seconds before shifting into R (Reverse).
  • Page 137 3. Shift into 1 (First). 4. Turn the ignition to position 1 (LOCK) to shut the engine off and remove the ignition key. WARNING: Do not park your vehicle in Neutral, it may move unexpectedly and injure someone. Use 1 (First) gear and set the parking brake fully.
  • Page 138 4x4 system indicator lights The 4x4 mode indicator light illuminates only under the following conditions. If the indicator light illuminates when driving in the 4x4 AUTO mode, contact your Mazda dealer as soon as possible. LOCK LOCK...
  • Page 139 The indicator light illuminates when the 4x4 ON mode is engaged. Shifting between 4x4 Auto and ON modes Press the four-wheel drive control to apply power to both axles. When you activate the control, the indicator light will illuminate in the instrument cluster.
  • Page 140 Driving pavement only after reducing your speed. Do not turn the steering wheel too sharply while returning to the road surface. It may be safer to stay on the apron or shoulder of the road and slow down gradually before returning to the pavement. You may loose control if you do not slow down or if you turn the steering wheel too sharply or abruptly.
  • Page 141 WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized Mazda dealership. Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transaxle may occur.
  • Page 142 Driving Sand When driving over sand, try to keep all four wheels on the most solid area of the trail. Avoid reducing the tire pressures but shift to a lower gear and drive steadily through the terrain. Apply the accelerator slowly and avoid spinning the wheels.
  • Page 143 Mazda Motor Corporation joins the U.S. Forest Service and the Bureau of Land Management in encouraging you to help preserve our national forest and other public and private lands by “treading lightly.”...
  • Page 144 Driving Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating. Do not descend in neutral; instead, disengage overdrive or manually shift to a lower gear. When descending a steep hill, avoid sudden hard braking as you could lose control.
  • Page 145 Tires, Replacement Requirements Do not use a size and type of tire and wheel other than that originally provided by Mazda Motor Corporation because it can affect the safety and performance of your vehicle, which could lead to loss of vehicle control or rollover and serious injury.
  • Page 146 For this reason, Mazda Motor Corporation strongly recommends that you do not make modifications such as adding or removing parts (such as lift kits or stabilizer bars) or by using replacement parts not equivalent to the original factory equipment.

  • Page 147: Vehicle Loading

    DRIVING THROUGH WATER Do not drive quickly through standing water, especially if the depth is unknown. Traction or brake capability may be limited and if the ignition system gets wet, your engine may stall. Water may also enter your engine’s air intake and severely damage your engine.
  • Page 148 Driving Maximum Trailer Weight Rating: Maximum weight of a trailer the vehicle is permitted to tow. The maximum trailer weight rating is determined by subtracting the vehicle curb weight for each engine/transmission combination, any required option weight for trailer towing and the weight of the driver from the GCWR for the towing vehicle.

  • Page 149: Trailer Towing

    WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle loss of vehicle control, vehicle rollover, and/or personal injury. Special loading instructions for owners of pickup trucks and utility-type vehicles WARNING: For important information regarding safe operation of this type of vehicle, see the Preparing to drive your vehicle section in this chapter.
  • Page 150 Driving Thoroughly prepare your vehicle for towing. Refer to Preparing to tow in this chapter. Use extra caution when driving while trailer towing. Refer to Driving while you tow in this chapter. Service your vehicle more frequently if you tow a trailer. Refer to the “Scheduled Maintenance”...
  • Page 151 Preparing to tow Use the proper equipment for towing a trailer and make sure it is properly attached to your vehicle. See your authorized Mazda dealer. Hitches Do not use hitches that clamp onto the vehicle bumper. Use a load carrying hitch.
  • Page 152 Trailer lamps Trailer lamps are required on most towed vehicles. Make sure your trailer lamps conform to local and Federal regulations. See your authorized Mazda dealer for proper instructions and equipment for hooking up trailer lamps. Driving while you tow When towing a trailer: Turn off the speed control.
  • Page 153 Servicing after towing If you tow a trailer for long distances, your vehicle will require more frequent service intervals. Refer to the “Scheduled Maintenance” section for more information. Trailer towing tips Practice turning, stopping and backing up before starting on a trip to get the feel of the vehicle trailer combination.
  • Page 154 Driving RECREATIONAL TOWING An example of “recreational towing” is towing your vehicle behind a motorhome. If your vehicle is automatic transmission equipped, with a 4x2 (front-wheel drive only) configured powertrain, “recreational towing” is permitted by trailering the vehicle with its front wheels on a dolly. This protects the transmission’s internal mechanical components from potential lack of lubrication damage.

  • Page 155: Roadside Emergencies

    HAZARD FLASHER CONTROL The hazard flasher is located on the instrument panel by the radio. The hazard flashers will operate when the ignition is off. Push in the flasher control and all front and rear direction signals will flash. Press the flasher control again to turn them off. Use it when your vehicle is disabled and is creating a safety hazard for other motorists.

  • Page 156: Fuses And Relays

    Roadside Emergencies FUSES AND RELAYS Fuses If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components. Note: Always replace a fuse with one that has the specified amperage rating.
  • Page 157 To remove a fuse use the fuse puller tool provided on the fuse panel cover. The fuses are coded as follows: Fuse/Relay Fuse Amp Location Rating Canister vent control solenoid Blower relay (coil), Pressure switch to Rear wiper motor, Rear washer motor, Rear wiper relay (coil) Four-wheel drive control module, Cluster (restraints control warning)
  • Page 158 Roadside Emergencies Fuse/Relay Fuse Amp Location Rating Flasher unit, Reversing lamps, Park Aid Module (PAM) Passive Anti-theft Transceiver (PATS), RCM, EEC fuse Cluster, Shift lock relay (coil), O/D signal to PCM, GEM, E/C autolamp mirror PCM relay (coil), Fan relay 1, 2, 3 (coil), A/C relay (coil) Front wiper motor, Front washer motor ACC relay (coil), Key interlock solenoid,...
  • Page 159 Fuse/Relay Fuse Amp Location Rating Stoplamps, High mounted stoplamp, Trailer stoplamp, ABS unit, ASC unit (Brake Pedal Position Switch), PCM, Shift solenoid Power window motors Power door lock motors, GEM (door lock relay coil), Power seat, 4WD relay GEM, Audio, Cluster, Interior lamp, Map lamp, Cargo lamp, Datalink connector —...
  • Page 160 Roadside Emergencies (ABS) MAIN 120A BTN 1 MAIN The high-current fuses are coded as follows. Fuse/Relay Fuse Amp Location Rating Horn Horn H/L LH 15A* Headlamp (high/low left, High beams) H/L RH 15A* Headlamp (high/low right, High beams) EEC (KPWR) HEGO 15A* HEGO 1,2, CMS 1,2, VMV...
  • Page 161 Fuse/Relay Fuse Amp Power Distribution Box Description Location Rating 30A** EEC (VPWR), EVR, MAF, IAC, Bulkhead, HEGO fuse MAIN 120A Main 15A* Alternator/ Regulator (DRL) 15A* Daytime Running Lamps (DRL) unit (feed), DRL relay (DRL2) 15A*(DRL2) DRL module, HLEV (HLEV) 10A(HLEV) PWR 1 15A*...

  • Page 162: Overheating

    Roadside Emergencies Fuse/Relay Fuse Amp Location Rating EEC MAIN — EEC relay FUEL PUMP — Fuel pump relay MAIN FAN — Low-speed fan control relay (2.0L engine) High-speed fan control relay 1 (3.0L engine) ADD FAN — High-speed fan control relay 1 (2.0L engine) Low-speed fan control relay (3.0L engine) DEF RELAY...
  • Page 163 If you find a leak or other damage, or if coolant is still leaking, stop the engine and call an Authorized Mazda dealer. See Adding coolant in the Maintenance and specifications section. If you find no problems, the engine is cool and no leaks are obvious, carefully add coolant as required.
  • Page 164 Roadside Emergencies When driving with the temporary spare tire do not: use more than one temporary spare tire at a time exceed 80 km/h (50 mph) or drive further than 3 200 km (2 000 miles) total under any circumstances load the vehicle beyond maximum vehicle load rating listed on the Safety Compliance Label tow a trailer...
  • Page 165 use tire chains drive through an automatic car wash, because of the vehicle’s reduced ground clearance try to repair the temporary spare tire or remove it from its wheel rim use the wheel for any other type of vehicle Tire change procedure WARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park)
  • Page 166 Roadside Emergencies 4. Lift the cargo cover and remove the tool bag with jack handle, lug nut wrench and long spare tire rod and spare tire from the wheel well. 5. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground.
  • Page 167 Rear jacking notches are located under the rear trailing arm. 6. Position the jack according to the following guides and turn the jack handle clockwise until the tire is a maximum of 25 mm (1 inch) off the ground. Never use the differentials as a jacking point.
  • Page 168 Roadside Emergencies 9. Lower the wheel by turning the jack handle counterclockwise. 10. Remove the jack and fully tighten the lug nuts in the order shown. NOTE: To stow the full size flat tire in the cargo floor, the long spare tire rod in the tool bag needs to be installed.

  • Page 169: Jump Starting

    JUMP STARTING YOUR VEHICLE WARNING: The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. Do not push start your vehicle. You could damage the catalytic converter.
  • Page 170 Roadside Emergencies Connecting the jumper cables 1. Connect the positive (+) booster cable to the positive (+) terminal of the discharged battery. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery.
  • Page 171 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 4. Make the final connection of the negative (-) cable to an exposed metal part of the disabled vehicle’s engine, away from the battery and the fuel injection system. NOTE: Do not use fuel lines, engine rocker covers or the intake manifold as grounding points.
  • Page 172 Roadside Emergencies 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables. Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery.
  • Page 173 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’s battery. 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’s battery. After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions.

  • Page 174: Wrecker Towing

    It is recommended that your vehicle be towed with a wheel lift and dollies or flatbed equipment. Do not tow with a slingbelt. Mazda has not approved a slingbelt towing procedure.
  • Page 175 If the vehicle is towed by other means or incorrectly, vehicle damage may occur. In case of a roadside emergency with a disabled vehicle (without access to wheel dollies, car hauling trailer or flatbed transport vehicle) your vehicle (regardless of powertrain configuration) can be flat towed (all wheels on the ground) under the following conditions: Place the transmission in N (Neutral).

  • Page 176: Customer Assistance

    Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take the following steps: STEP 1: Contact Your Mazda Dealer Discuss the matter with an Authorized Mazda Dealer.
  • Page 177 CUSTOMER ASSISTANCE (CANADA) Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. In our experience, any questions, problems or complaints regarding the operation of your Mazda or any other general service transactions are most effectively resolved by your dealer.
  • Page 178 Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers. Mazda’s participation in CAMVAP makes a valuable contribution to our achieving that goal.
  • Page 179 British Columbia & Yukon Territories Alberta & Northwest Territories Saskatchewan Manitoba Ontario Atlantic Canada Quebec REGIONAL OFFICES Regional Offices Mazda Canada Inc. Western Region 8171 Ackroyd Road Suite 2000 Richmond, B.C. V6X 3K1 (604) 303–5670 Mazda Canada Inc. Central/Atlantic Region 305 Milner Avenue Suite 400 Scarborough, Ontario.
  • Page 180 Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take the following steps: STEP 1 Discuss the matter with an Authorized Mazda Dealer.
  • Page 181 Scarborough, Ontario M1B 3V4 Canada TEL: 1 (800) 263–4680 (in Canada) (416) 609–9909 (outside Canada) PUERTO RICO Plaza Motors Corp. (Mazda de Puerto Rico) P.O. Box 362722, San Juan, Puerto Rico 00936–2722 TEL: (787) 788–9300 GUAM Triple J. Enterprises, Inc.
  • Page 182 TEL: (684) 699–1854 ADD-ON NON-GENUINE PARTS AND ACCESSORIES Non-genuine parts and accessories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by the manufacturer for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle’s performance or...
  • Page 183 The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. We strongly recommend that you NOT take your Mazda outside these areas. You may have these problems if you do: Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will affect vehicle performance and damage the emission controls and engine.
  • Page 184 Customer Assistance (Note) If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to: Mazda North American Operations 7755, Irvine Center Drive Irvine, California 92618–2922 P.O. Box 19734 Irvine, CA 92623–9734 Customer Assistance Center or toll free at 1 (800) 222–5500 If you live outside of the U.S.A., please contact the nearest Mazda...
  • Page 185 In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Mazda North American Operations 7755, Irvine Center Drive Irvine, CA 92618–2922 Customer Assistance...

  • Page 186: Reporting Safety Defects (U.s. Only)

    However, NHTSA cannot become involved in individual problems between you, your dealer or Mazda Corporation. To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1–800–424–9393 (202–366–0123 in the Washington D.C.

  • Page 187: Cleaning

    WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutral Ph shampoo, such as an approved shampoo available from your Mazda dealer. Never use strong household detergents or soap, such as dish washing or laundry liquid. These products can discolor and spot painted surfaces.
  • Page 188 Never spray the engine or other engine components with water. Water will damage the engine or other engine components. Spray Engine Shampoo and Degreaser, available at your authorized Mazda dealer, on all parts that require cleaning and pressure rinse clean. Cover the highlighted areas to prevent water damage when cleaning...
  • Page 189 Mazda dealer. If tar or grease spots are present, use Extra Strength Tar and Road Oil Removal, available at your authorized Mazda dealer. WINDOWS AND WIPER BLADES The windshield, rear window and wiper blades should be cleaned regularly.
  • Page 190 INTERIOR For fabric, carpets, cloth seats, safety belts and seats equipped with side air bags: Remove dust and loose dirt with a vacuum cleaner. Remove light stains and soil with Extra Strength Upholstery Cleaner, available at your authorized Mazda dealer.
  • Page 191 MAZDA CAR CARE PRODUCTS Your Mazda dealer has many quality products available to clean your vehicle and protect its finishes. These quality products have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and appearance of your vehicle.

  • Page 192: Maintenance And Specifications

    Mazda workmanship. Any auto repair shop using parts equivalent to your Mazda’s original equipment may perform maintenance. But we recommend that it always be done by an Authorized Mazda Dealer using genuine Mazda parts.
  • Page 193 Maintenance and Specifications SCHEDULE 1 I: Inspect and repair, clean, adjust, or replace if necessary (Oil-permeated air filter cannot be cleaned using the air-blow method) R: Replace L: Lubricate Maintenance Interval (Number of months or km (miles), Months Maintenance Item x 1000 Km (x 1000 Miles) (7.5) (15) (22.5) (30) (37.5) (45) (52.5) (60) (67.5) (75) (82.5) (95) ENGINE...
  • Page 194 *1 According to state and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage (kilometrage) period to ensure long-term reliability.
  • Page 195 Maintenance and Specifications Maintenance Interval (Number of months or km (miles), Months Maintenance Item x 1000 Km (x 1000 Miles) (5) (10) (15) (20) (25) (30) (35) (40) (45) (50) (55) (60) ENGINE Engine valve clearance (for 2.0L engine) Engine timing belt (for 2.0L engine) Engine oil Engine oil (for Puerto Rico) Replace every 4,800 km (3,000 miles) (or 3 months)
  • Page 196 *1 According to state and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage (kilometrage) period to ensure long-term reliability.
  • Page 197 Check your “Warranty Information” to find out which parts and services are covered. Use only recommended fuels, lubricants, fluids and service parts conforming to specifications. Genuine Mazda parts are designed and built to provide the best performance in your vehicle. PRECAUTIONS WHEN SERVICING YOUR VEHICLE WARNING: A hot engine is dangerous.
  • Page 198 Maintenance and Specifications Working with the engine on Automatic transmission: 1. Set the parking brake and shift to P (Park). 2. Block the wheels. Manual transmission: 1. Set the parking brake, depress the clutch and place the gearshift in N (Neutral). 2.
  • Page 199 Maintenance and Specifications 2. At the front of the vehicle, lift up on the auxiliary latch handle located in the center between the hood and the grille. 3. Lift the hood open and secure it with the prop rod.

  • Page 200: Engine Compartment

    Maintenance and Specifications IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.0L DOHC I4 Zetec engine 1. Power steering fluid reservoir 2. Engine coolant reservoir 3. Brake/Clutch fluid reservoir 4. Air filter assembly 5. Power distribution box 6. Battery 7. Engine oil filler cap 8.
  • Page 201 Maintenance and Specifications 3.0L DOHC V6 Duratec engine 1. Power steering fluid reservoir 2. Engine coolant reservoir 3. Automatic transmission fluid dipstick 4. Brake fluid reservoir 5. Air filter assembly 6. Power distribution box 7. Battery 8. Engine oil dipstick 9.
  • Page 202 Add fluid to fill the reservoir if the level is low. In very cold weather, do not fill the reservoir completely. Only use a washer fluid that meets Mazda specifications. Refer to Refill capacities in this chapter. WARNING: If you operate your vehicle in temperatures below 4.5°...

  • Page 203: Engine Oil

    Maintenance and Specifications ENGINE OIL Checking the engine oil Refer to the service maintenance section for the appropriate intervals for checking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan.
  • Page 204 Maintenance and Specifications 3.0L DOHC V6 Duratec engine 6. Wipe the indicator clean. Insert the indicator fully, then remove it again. If the oil level is between the MIN-MAX or ADD-FULL marks, the oil level is acceptable. DO NOT ADD OIL. If the oil level is below the MIN or ADD mark, add enough oil to raise the level within the MIN–MAX or ADD-FULL range.
  • Page 205 Maintenance and Specifications 3.0L DOHC V6 Duratec engine Oil levels above the MAX or FULL mark may cause engine damage. Some oil must be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. Adding engine oil 1.
  • Page 206 If a replacement oil filter is used that does not meet Mazda material and design specifications, start-up engine noises or knock may be experienced. It is recommended you use the appropriate Genuine Mazda oil filter (or another brand meeting Mazda specifications) for your engine application.

  • Page 207: Battery

    Maintenance and Specifications BATTERY Your vehicle is equipped with a Mazda maintenance-free battery which normally does not require additional water during its life of service. However, for severe usage or in high temperature climates, check the battery electrolyte level. Refer to the service maintenance section for the service interval schedules.
  • Page 208 Maintenance and Specifications WARNING: When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and/or damage to the vehicle or battery. Lift the battery with a battery carrier or with your hands on opposite corners.
  • Page 209 Maintenance and Specifications transmission may shift firmly. This operation is considered normal and will not affect function or durability of the transmission. Over time the adaptive learning process will fully update transmission operation to its optimum shift feel. If the battery has been disconnected or a new battery has been installed, the clock and the preset radio stations must be reset once the battery is reconnected.
  • Page 210 Maintenance and Specifications When the engine is cold, check the level of the engine coolant in the reservoir. The engine coolant should be at the “cold fill level” or within the “cold fill range” as listed on the engine coolant reservoir (depending upon application).
  • Page 211 To maintain the integrity of the coolant and the cooling system and maintain the warranty on the cooling system: Add Mazda Premium Engine Coolant or the type of coolant originally equipped in your vehicle. If you are unsure which type of coolant your vehicle requires, check your coolant reservoir or contact your local dealer.
  • Page 212 Maintenance and Specifications WARNING: To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. 1.
  • Page 213 Not all coolant recycling processes produce coolant which meets Mazda recommend coolants. Use of a recycled engine coolant which does not meet the Mazda recommended coolant, may harm engine and cooling system components. Always dispose of used automotive fluids in a responsible manner.

  • Page 214: Fuel Information

    Maintenance and Specifications Refer to the chart on the coolant container to ensure the coolant concentration in your vehicle will provide adequate protection at the temperatures in which you drive. Vehicles driven year-round in non-extreme climates should use a 50/50 mixture of engine coolant and distilled water for optimum cooling system and engine protection.
  • Page 215 Maintenance and Specifications Observe the following guidelines when handling automotive fuel: WARNING: Automotive fuels can be harmful or fatal if swallowed. Fuel such as gasoline is highly toxic and if swallowed can cause death or permanent injury. If fuel is swallowed, call a physician immediately, even if no symptoms are immediately...
  • Page 216 Maintenance and Specifications WARNING: When refueling always shut the engine off and never allow sparks or open flames near the filler neck. Never smoke while refueling. Fuel vapor is extremely hazardous under certain conditions. Care should be taken to avoid inhaling excess fumes.
  • Page 217 Fuel Charter should be used when available. Ask your fuel supplier about gasolines that meet the World-wide Fuel Charter. In Canada, look for fuels that display the Auto Makers’ Choice logo. Cleaner air Mazda endorses the use of reformulated “cleaner-burning” gasolines to improve air quality.
  • Page 218 If you must replace the fuel filler cap, replace it with a fuel filler cap that is designed for your vehicle. The customer warranty may be void for any damage to the fuel tank or fuel system if the correct genuine Mazda fuel filler cap is not used.
  • Page 219 Fuel Filter For fuel filter replacement, see your authorized Mazda dealership. Refer to the service maintenance section for the appropriate intervals for changing the fuel filter.
  • Page 220 Maintenance and Specifications The amount of usable fuel in the empty reserve varies and should not be relied upon to increase driving range. When refueling your vehicle after the fuel gauge indicates empty, you might not be able to refuel the full amount of the advertised capacity of the fuel tank due to the empty reserve still present in the tank.
  • Page 221 Maintenance and Specifications Driving style — good driving and fuel economy habits Give consideration to the lists that follow and you may be able to change a number of variables and improve your fuel economy. Habits Smooth, moderate operation can yield up to 10% savings in fuel. Steady speeds without stopping will usually give the best fuel economy.
  • Page 222 Maintenance and Specifications Carrying unnecessary weight may reduce fuel economy (approximately 0.4 km/L [1 mpg] is lost for every 180 kg [400 lb] of weight carried). Adding certain accessories to your vehicle (for example bug deflectors, rollbars/light bars, running boards, ski/luggage racks) may reduce fuel economy.
  • Page 223 If other than Mazda authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Mazda parts should be equivalent to genuine Mazda parts in performance and durability. WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover.
  • Page 224 Maintenance and Specifications Next, at least 20 minutes driving in stop-and-go, city-type traffic with at least four idle periods. Allow the vehicle to sit for at least eight hours without starting the engine. Then, start the engine and complete the above driving cycle. The engine must warm up to its normal operating temperature.
  • Page 225 MAX. Do not fill above this line. 4. Use only brake fluids certified to meet Mazda specifications. Refer to Lubricant specifications in this chapter. DOT 3 fluid is recommended. However, if DOT 3 is not available, DOT 4 fluid can be used.
  • Page 226 Maintenance and Specifications TRANSMISSION FLUID Checking automatic transmission fluid Refer to your scheduled maintenance section for scheduled intervals for fluid checks and changes. Your transaxle does not consume fluid. However, the fluid level should be checked if the transaxle is not working properly, i.e., if the transaxle slips or shifts slowly or if you notice some sign of fluid leakage.
  • Page 227 Maintenance and Specifications The transmission fluid should be in the crosshatch zone if at normal operating temperature (66°C-77°C [150°F-170°F]). High fluid level Fluid levels above the crosshatch zone may result in transaxle failure. An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage.

  • Page 228: Air Filter(S)

    Seek medical attention immediately. AIR FILTER MAINTENANCE Refer to the service maintenance section for the appropriate intervals for changing the air filter element. When changing the air filter element, only use a Genuine Mazda air filter element.
  • Page 229 Maintenance and Specifications WARNING: Do not start your engine with the air cleaner removed and do not remove it while the engine is running. Changing the air filter element 1. Loosen the clamp that secures the air inlet tube to the engine air filter cover and disconnect the tube from the cover.
  • Page 230 10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Mazda to give you the following information about tire grades exactly as the government has written it. Treadwear...
  • Page 231 Maintenance and Specifications WARNING: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. SERVICING YOUR TIRES Checking the tire pressure Use an accurate tire pressure gauge.
  • Page 232 Maintenance and Specifications Four tire rotation Five tire rotation Replacing the tires Replace the tires when the wear band is visible through the tire treads.
  • Page 233 WARNING: Make sure that all replacement tires are of the same size, type, load=carrying capacity and tread (e.g., “All Terrain”, etc.), as originally offered by Mazda. Failure to do so can result in tire failure and a serious accident. WARNING: Do not replace your tires with “high performance”...

  • Page 234: Refill Capacities

    Maintenance and Specifications Drive cautiously. If you hear the chains rub or bang against the vehicle, stop and retighten them. If this does not work, remove the cables to prevent vehicle damage. Avoid overloading your vehicle. Remove the tire chains when they are no longer needed. Do not use chains on dry roads.
  • Page 235 Maintenance and Specifications Fluid Classification Transfer Case SAE 75W-140 Synthetic Lubricant API service GL-5, SAE 80W-90 Engine coolant Mazda green-colored or yellow-colored Premium Engine Coolant Rear axle API service lubricant GL-5, SAE 80W-90 Premium Rear Axle Lubricant Windshield washer fluid Ensure the correct automatic transmission fluid is used.

  • Page 236: Engine Data

    Maintenance and Specifications For further information on your lubrication specifications, see your authorized Mazda dealer. WHEEL AND TIRE SIZES Vehicle Grade Wheel 6.5JJx16 LX-V6/ES-V6 7.0JJx16 DX-V6 –(Puerto Rico only) ENGINE SPECIFICATIONS Engine 2.0L DOHC I4 Zetec engine Cubic inches Required fuel...
  • Page 237 Maintenance and Specifications...
  • Page 238 Maintenance and Specifications IDENTIFYING YOUR VEHICLE Certification label The National Highway Traffic Safety Administration Regulations require that a Certification Label be affixed to a vehicle and prescribe where the Certification Label may be located. The Certification Label is located on the front door latch pillar on the driver’s side.

  • Page 239: Accessories

    CELL PHONES Use of cell phones and other devices by driver: WARNING: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous. Dialing a number on a cell phone while driving also ties-up the driver’s hands.

  • Page 240: Index

    Index ABS (see Brakes) ...125 Accessory delay ...61 Air bag supplemental restraint system ...99, 104 and child safety seats ...101 description ...99, 104 disposal ...103, 107 driver air bag ...101, 106 indicator light ...103, 107 operation ...101, 106 passenger air bag ...101, 106 side air bag ...104 Air cleaner filter ...228–229 Air conditioning...
  • Page 241 Cleaning your vehicle engine compartment ...188 instrument panel ...190 interior ...190 interior trim ...190 Mazda car care products ...191 plastic parts ...189 washing ...187 waxing ...187 wheels ...188 wiper blades ...189 Climate control (see Air conditioning or Heating) ...44 Clock ...26, 39 Clutch fluid ...228...
  • Page 242 Index preparing to drive your vehicle ...128 Fuel ...214 calculating fuel economy ...219 cap ...218 capacity ...234 choosing the right fuel ...216 comparisons with EPA fuel economy estimates ...222 detergent in fuel ...217 filling your vehicle with fuel ...214, 218–219 filter, specifications ...219 fuel filler door release ...65 improving fuel economy ...219...
  • Page 243 Keys positions of the ignition ...120 Lamps bulb replacement specifications chart ...51 cargo lamps ...49 daytime running light ...48 fog lamps ...48 headlamps ...48 headlamps, flash to pass ...49 instrument panel, dimming ...49 interior lamps ...50–51 replacing bulbs ...51–55 Lane change indicator (see Turn signal) ...50 Liftgate ...67 Lights, warning and indicator ...10...
  • Page 244 Index Rear window defroster ...47 Relays ...156 Remote entry system illuminated entry ...74 locking/unlocking doors ...69 Roof rack ...68 Safety belts (see Safety restraints) ...89–93 Safety defects, reporting ...186 Safety restraints ...89–94 cleaning the safety belts ...98 extension assembly ...95 for adults ...90–93 for children ...108 lap belt ...95...
  • Page 245 Warning lights (see Lights) ...10 Washer fluid ...202 Water, Driving through ...147 Windows power ...60 rear wiper/washer ...56 Index Windshield washer fluid and wipers checking and adding fluid ...202 checking and cleaning ...57 liftgate reservoir ...202 operation ...56 replacing wiper blades ...57 Wrecker towing ...174...

Table of Contents