Battery Pack - Hyundai HY2151 User Manual

2.4.8. Use of the power tool for operations different from those intended could result in a
hazardous situation.
2.5. Battery Use and Care
2.5.1. Recharge only with the charger supplied, and specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with another

battery pack.

2.5.2. Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
2.5.3. When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause explosions, burns and
or a fire.
2.5.4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
2.6. Service.
2.6.1. Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
2.7. Cordless driver drill safety warnings.
2.7.1. Wear ear protectors when drilling. Exposure to noise can cause hearing loss.
2.7.2. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
2.7.3. Hold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and could give the operator an electric
shock.
2.7.4. Always be sure you have a firm footing. Be sure no one is below when using the tool in high
locations.
2.7.5. Hold the tool firmly.
2.7.6. Keep hands away from rotating parts.
2.7.7. Do not leave the tool running. Operate the tool only when hand-held.
2.7.8. Do not touch the bit or the work piece immediately after operation; they may be extremely
hot and could burn your skin.
2.7.9. Some material contains chemicals which may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material supplier safety data.
3. BATTERY PACK
3.1. Before use.
3.1.1. Before using battery pack, read all instructions and cautionary markings on the battery
charger, battery, and product using battery.
3.1.2. Do not disassemble battery cartridge.
3.1.3. If operating time has become excessively shorter, stop operating immediately. It may result
in a risk of overheating, possible burns and even an explosion.
3.1.4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical
attention right away. It may result in loss of your eyesight.
Page 5