Installation Notes Congratulations on your purchase of an Elux Series product from VM Audio. You have seen that with years of acquired taste for quality, the Elux Series has the right design and performance to satisfy your utmost demand. With music so clear and rich and bass so low and loud, you will be immersed in a world of musical euphoria that anything else will seem like white noise.
Installation Notes System Features (continued) • High-Strength Kapton Former with KSV Voice Coil • All-Weather Speaker Wire Connector Important Safety Information CAUTION 1. Please read these instructions carefully before you attempt to install and operate this product. 2. Keep this User Guide for future reference. 3.
Warranty Turnaround Time contact either VM Audio or a professional installer for assistance. It is VM Audio’s goal to turnaround the merchandise in a timely fashion of 1 week. Unexpected delays may occur due to repair parts or replacement shortage.
Page 5
Specifi cations Installation (continued) EX-WOD4 Mounting the Speakers • RMS: 70W Total • Midrange Driver: 1-½” 1. With a pencil, mark the Wall No Stud intended mounting locations, • Peak: 280W Total • High Frequency Driver: ½” Stud using the mounting brackets •...
Connecting the Speakers to Your Receiver Troubleshooting Tab Connection No Sound (EX-WOD4/EX-WOD8) 1. Strip the red and black • Check the speaker wires and ensure they have a solid connection receiver wires approximately to all the speaker terminals on each speaker and on the amplifi er ½”...