Hitachi CR 13VC Technical Data And Service Manual page 20

(5) Removal of Inner Cover (B) [33] and Armature [35] (Fig. 7)
Push the pinion end surface of the Armature [35] with a press supporting the end surface of Inner Cover (B)
[33] to remove the Armature [35]. Remove two Slotted Hd. Screws (Seal Lock) M4 x 10 [24] and the Ball
Bearing 6001VVCMPS2L [34].
(6) Removal of Handle (A) [53] and Handle (B) [48] (Fig. 8)
Remove five Tapping Screws (W/Flange) D4 x 25 (Black) [47] and Handle (B) [48]. Then the Switch Trigger
[50] can be removed.
[33]
[34]
[50]
[48]
[47]
[24]
[35]
Fig. 7
[53]
Fig. 8
--- 17 ---
[39]