Mobile Phone Operation With Luetooth - Cobra MR HH475 FLOAT BT Owner's Manual

Mobile Phone Operation
With luetooth
Operating Your Radio VHF Marine Radio Protocols

Mobile Phone Operation with luetooth

NOTE
Please refer to the luetooth Mode Pairing and Programming section on
page 23 for instructions on how to pair your mobile phone with this device,
change ring tones, etc. The following section covers how to complete a
phone call and other basic operations.
Answer Incoming Phone Calls
Answering a Call
This handheld radio, once properly paired to your luetooth
compatible mobile phone, can answer incoming calls received
on your mobile phone. It can act as the speaker and microphone,
while your mobile phone stays safe and dry. It will also
improve audio quality on both ends of the conversation.
To Answer and End an Incoming Call:
1. The speaker on the HH475 will ring. The display will
luetooth Button
change and show the word "AnSEr" as shown.
2. Press and release the luetooth button on the MR
HH475BT front panel. After the call is answered, the
LCD will switch to "Connct" as illustrated.
3. Begin conversation with the caller by a pressing the
PTT (Push to Talk) key and speaking into the small
microphone above the LCD. This is very similar to a
standard radio operation and it completely eliminates
Connected to a Call
all background noise when you are not speaking.
NOTE
To enable hands free conversation or "VOX" mode
(pressing in the PTT key not required), use the
Channel Up and Channel Down keys anytime when
in luetooth mode. The "VOX" icon will turn on when
VOX mode is enabled.
The luetooth "VOX" setting does NOT reset to Off
after a power cycle unlike the normal VOX associated
with VHF mode.
4. To end a call, press and release the luetooth button.
The HH475 will then return to previous Standby mode
and resume normal operation.
40 English
®
®
®
www.busse-yachtshop.de | info@busse-yachtshop.de
Mobile Phone Operation
With luetooth
Operating Your Radio VHF Marine Radio Protocols
Initiate a Phone Call
Initiating a Call
There are several ways to initiate a call. These include;
initiating (as normal) from the mobile phone, using voice
dialing and last number redial.
To Initiate from the Mobile Phone
1. Simply dial a number on your mobile phone.
(See manufacturer's instructions for making a call.)
When the phone's Send key is pressed, the HH475
Connected to a Call
will respond by changing over to luetooth mode
and displaying "diaLng" as illustrated.
2. You will see "Connct" when the receiving party, or
their voice mail, answers.
3. To end a call, press and release the luetooth button.
The HH475 will then return to previous Standby mode
and resume normal operation.
®
Nothing Comes Close to a Cobra ® 41