1. Manuals
  2. Brands
  3. GLOBAL ASSISTIVE DEVICES Manuals
  4. Timer
  5. GLOBAL 360
  6. Instruction manual

GLOBAL ASSISTIVE DEVICES Global 360 Instruction Manual

Hide thumbs Also See for Global 360:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
Congratulations on your purchase of "GLOBAL
360". This quality product is the answer for people
with special needs for wake up providing the unique
feature of an Auto Repeat Countdown Timer.
BEFORE using your unit, take a few minutes to
read the following instructions. The understanding
of the features will allow you ease in setting and
ensure effective use.
POWER SOURCE: Power Supply and Universal
Adapter Plugs Included
Insert the small barrel plug of the Power Supply
(Output: DC 12V, 1000 mA; Input 100-240 Volt 50-
60 Hz) into the jack at the back of the clock labeled
12V DC Adapter.
Connect the power supply with the adapter plug that
is required for your electrical outlet.
Plug into an Electrical outlet near your bedside.
Note: 12:00 will flash on the clock display. When
you set the time, the display will stop flashing.
BATTERY BACK UP: CR2032 Button Cell
Included
In the event of a power failure, the clock will keep
the clock time running and the preset times for

Advertisement

Table of Contents
loading

Related Manuals for GLOBAL ASSISTIVE DEVICES Global 360

Summary of Contents for GLOBAL ASSISTIVE DEVICES Global 360

  • Page 1 Congratulations on your purchase of “GLOBAL 360”. This quality product is the answer for people with special needs for wake up providing the unique feature of an Auto Repeat Countdown Timer. BEFORE using your unit, take a few minutes to read the following instructions.

  • Page 2: Setting The Clock Time

    alarm and countdown timer. The clock display will not light to save battery energy. Note: If you have a long power failure you may need to make a slight adjustment to the clock time after the AC power returns. To activate the battery backup function, open the Circular Battery Door located on the bottom of the clock by a turn counter clockwise and pull the protective plastic tab out.
  • Page 3 SELECT 12 HOUR (AM/PM Time) OR 24 HOUR TIME. Slide the SET MODE switch to “TIME” position. Press and Hold the SET button and press the START/STOP button to change to your desired format. SELECT THE ALERT MODE: Vibrate, Audible or Both Slide the ALERT MODE switch (3-position switch located on the left side of the clock) to select the...

  • Page 4: Alarm Clock

    Slide the ALERT MODE switch (3-position switch located on the left side of the clock) to VIBRATE or BOTH. Place the Bedshaker under your pillow or mattress. Slide the ALARM/COUNTDOWN TIMER switch (4 position switch located on the right side of the clock) to BOTH ON position.
  • Page 5 Note: When using the 12 Hour Clock, use the Yellow PM INDICATOR LIGHT located at the top left of the clock display for accurate setting. When the display is reading PM time, the light will be "on". The light will be off when the clock is reading AM time.

  • Page 6: Using The Snooze Feature

    Note: The Blue ALARM indicator light will not show on the display. USING THE SNOOZE FEATURE After the alarm is activated, press the SNOOZE button to stop alert activity (audible, Bedshaker or both). Note: The Blue ALARM indicator light will flash. In approximately 9 minutes the alert(s) will start again automatically.

  • Page 7: Setting The Countdown Timer

     Programmed time will automatically repeat each time the countdown reaches “00.00” unless turned off manually. SETTING THE COUNTDOWN TIMER: Slide the SET MODE switch to “TIMER” position. Press and Hold the SET button and press the HOUR button to set the hours. Press and Hold the SET button and press the MINUTE button to set the minutes.
  • Page 8 Reset using the SET button and HOUR and MINUTE buttons as noted above. TO CHECK THE COUNTDOWN TIME SETTING: Slide the SET MODE switch to “TIMER”. The Clock Display will show the countdown time that has been set or remains. To check original time set, Press the START/STOP button and then press the SET button.

  • Page 9: Care And Maintenance

    Note: If the Alerts (Vibrate, Audible or Both) are currently activated, Press the START/STOP button twice. CARE AND MAINTENANCE GLOBAL 360 has been carefully designed and manufactured to provide you with accuracy and dependability. The following suggestions will help you care for your clock/countdown timer so that you can enjoy the maximum from it.

  • Page 10: One-Year Limited Warranty

    The user should not attempt to service the unit. All servicing should be referred to: ONE YEAR LIMITED WARRANTY Your GLOBAL 360 is warranted to be free from defects in material or workmanship for One Year from the date of purchase. This is a limited warranty and covers functions only.

  • Page 11: Out-Of-Warranty Service

    DISCLAIMER: In no event shall Global Assistive Devices, Inc. be held liable for any special, incidental, indirect or consequential damages whatsoever including, but not limited to, damages for loss of property,...
  • Page 12 GLOBAL is used with this product, GLOBAL will not accept any liability for the performance or malfunction of the connected product. GLOBAL ASSISTIVE DEVICES, INC. Oakland Park, FL USA 33334 www.GlobalAssistive.com “Global 360” is a trademark of GLOBAL ASSISTIVE DEVICES, INC.

Table of Contents