GLOBAL ASSISTIVE DEVICES GLOBAL 360 Manual

CONGRATULATIONS on your purchase of "GLOBAL 360". This
quality product is the designed for people with special needs for wake
up providing the unique feature of an Auto Repeat Countdown Timer.
BEFORE using your unit, take a few minutes to read the following
instructions. The understanding of the features will allow you ease in
setting and ensure effective use.
POWER SOURCE: Power Supply and Universal Adapter Plugs
Included
1) Insert the small barrel plug of the Power Supply (Output: DC 12V,
1000 mA; Input 100-240 Volt 50-60 Hz) into the jack at the back
of the clock labeled 12V DC Adapter.
2) Connect the power supply with the adapter plug that is required
for your electrical outlet.
3) Plug into an Electrical outlet near your bedside.
Note: 12:00 will flash on the clock display.
When you set the time, the display will stop flashing.
BATTERY BACK UP: CR2032 Button Cell Included
In the event of a power failure, the clock will keep the clock time
running and the preset times for alarm and countdown timer. The clock
display will not light to save battery energy.
Note: If you have a long power failure you may need to make a slight
adjustment to the clock time after the AC power returns.
To activate the battery backup function, open the Circular Battery Door
located on the bottom of the clock by a turn counter clockwise and pull
the protective plastic tab out.
Note: Replace Battery as required.
The life expectancy of CR2032 battery is approximately 2 years.
SETTING THE CLOCK TIME
Slide the SET MODE switch to "TIME" position.
1)
2) Press and Hold the SET button and press the HOUR button to set
the hours.
Note: When using the 12 Hour Clock, use the Yellow PM
INDICATOR LIGHT located at the top left of the clock display for
accurate setting. When the clock is reading PM time, the light will
be "on". The light will be off when the clock is reading AM time.
3) Press and Hold the SET button and press the MINUTE button to
set the minutes.
SELECT 12 HOUR (AM/PM Time) OR 24 HOUR TIME.
Slide the SET MODE switch to "TIME" position.
1)
2) Press and Hold the SET button and press the START/STOP
button to change to your desired format.
SELECT THE ALERT MODE: Vibrate, Audible or Both
Slide the ALERT MODE switch (3-position switch located on the left
side of the clock) to select the desired alerts for Clock Alarm and
Countdown Timer.
VIBRATE activates bedshaker.
AUDIBLE activates sound.
BOTH activates both bedshaker and sound.
When using the AUDIBLE Alert, the sound can be adjusted.
Slide the AUDIBLE switch on the top of the clock to "LOUD" or
"SOFT".
BEDSHAKER:
When the Alarm or Countdown Timer is activated, the Bedshaker will
pulse vibrate.
1) Insert the mini barrel plug of the Bedshaker cable into the jack at
the back of the clock labeled BEDSHAKER.and place the
Bedshaker under your pillow or mattress.
2) Slide the ALERT MODE switch (3-position switch located on
the left side of the clock) to VIBRATE or BOTH.
3) Slide the ALARM/COUNTDOWN TIMER switch (4 position
switch located on the right side of the clock) to BOTH ON
position.
4) Press the START/STOP button to manually stop the vibration
alert.
ALARM CLOCK

Alert(s) set (VIBRATE, AUDIBLE or BOTH) will be activated
when the alarm time is reached.

Activated Alerts can be manually stopped by pressing the
START/STOP button while Clock display is in any MODE.
(TIME, ALARM or TIMER) or will automatically stop after
approximately 20 minutes.

Set Alarm Time will remain set for daily alerts and can be turned
off for days not wanted with ALARM/COUNTDOWN TIMER
switch.
SETTING THE ALARM TIME
Slide the SET MODE switch to "ALARM" position.
1)
2) Press and Hold the SET button and press the HOUR button to set
the hours.
Note: When using the 12 Hour Clock, use the Yellow PM
INDICATOR LIGHT located at the top left of the clock display for
accurate setting. When the display is reading PM time, the light
will be "on". The light will be off when the clock is reading AM
time.
3) Press and Hold the SET button and press the MINUTE button to
set the minutes.
Note: The Blue ALARM Indicator light (located at the bottom left
of the clock display) will show.
The Alarm Time will remain set and will be activated daily at the
same time unless turned off or manually changed.
TO CHECK THE ALARM TIME SETTING
Slide the SET MODE switch to "ALARM"
The Clock Display will then show the alarm time that has been set.
TURNING OFF CLOCK ALARM
Slide the ALARM/COUNTDOWN TIMER switch (4-position switch
located on the right side of the clock) to CLOCK ALARM OFF or
BOTH OFF for days you do not want the alarm clock to wake you.
The Alarm time will remain set for future use.
Note: The Blue ALARM indicator light will not show on the display.
USING THE SNOOZE FEATURE
You can press the SNOOZE button to stop the alarm alert and have it
repeat automatically in approximately 9 minutes. This can be repeated
again and again.
After the alarm is activated, press the SNOOZE button to stop alert
activity (audible, Bedshaker or both).
Note: The Blue ALARM indicator light will flash.
COUNTDOWN TIMER

Program a Countdown Time for any amount of minutes and/or
hours up to 23 hours 59 minutes.

Alert(s) set (VIBRATE, AUDIBLE or BOTH) will be activated
when the countdown reaches "00.00".