Disassembly - Sharp CD-C430H Service Manual

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need be
removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
CD-C430H
STEP REMOVAL
1 Top Cabinet 1. Screw ..................... (A1) x4
2 Side Panel 1. Screw ..................... (B1) x6
(Left/right)
3 CD Player Unit/ 1. Turn on the power supply,
CD Tray Cover
2. Hook ....................... (C1) x3
3. Hook ....................... (C2) x2
4. Socket .................... (C3) x4
4 Back Board 1. Screw ..................... (D1) x5
5 Main PWB/ 1. Screw ..................... (E1) x12
Display PWB/ 2. Socket .................... (E2) x4
Headphone PWB
6 Front Panel 1. Screw ..................... (F1) x2
2. Hook ....................... (F2) x2
7 Tape Mechanism 1. Open the cassette holder.
2. Screw...................... (G1) x6
8 Turntable 1. Screw ..................... (H1) x1
2. Cover ..................... (H2) x1
9 Disc Tray 1. Screw ..................... (J1) x2
2. Guide ..................... (J2) x2
10 CD Changer 1. Screw ..................... (K1) x4
Mechanism
11 CD Mechanism 1. Screw ..................... (L1) x1
Note 1:
How to open the changer manually. (Fig. 7-3)
1. Insert the tip of fine screwdriver into the hole of CD player
base, and press down the worm wheel < A > .
2. Then, turn fully the lock lever in the arrow direction through
the hole on the loading chassis bottom in this state.
After that, push forward the CD player base.
CP-C430H
STEP REMOVAL
1 Speaker 1. Net Frame Ass'y ..... (A1) x1
2. Duct Front Panel .... (A2) x1
3. Screw ...................... (A3) x4
4. Screw ...................... (A4) x4

DISASSEMBLY

PROCEDURE
open the disc tray, take out
the CD cover, and close.
(Note 1)
PROCEDURE
CP-C430H
( A1 ) x2
ø3 x12mm
Side Panel
(Right)
( B1 ) x1
ø3 x10mm
FIGURE
( B1 ) x2
7-1
ø3 x12mm
7-1
( B1 ) x2
ø3 x12mm
7-2
Push
7-2
8-1
CD Player Unit
8-1
8-2
8-3
8-3
8-4
( D1 ) x6
ø3 x12mm
8-4
FIGURE
7-5
7-6
– 7 –
CD-C430H,CP-C430H
Top Cabinet
( B1 ) x1
ø3 x10mm
Figure 7-1
CD Tray Cover
Hook
( C2 ) x1
Driver
( C3 ) x3
Back Board
Figure 7-2
LOCK
LEVER
Figure 7-3
( A1 ) x2
ø3 x12mm
Side Panel
(Left)
Hook
( C1) x3
Hook
( C2 ) x1
Push
Driver
( C3 ) x1
< A >