HTC 500 Service Manual page 39

32. Once this is done (Fig. 8) fit the bearing cup to the centre hub and screw the fixing bosses in
place.
33. Clean the inside of the machine, making sure that no loose items such as screws have been
left there, before replacing the cover. A foreign object could negate the entire service.
Fig. 9 Locating pin M6 For bearing cups
HTC 500, 650 and 800. Art.No:310050
34. Locating pins facilitate closing.
Order locating pins from HTC or make your own by cutting the heads off long M6 screws.
35. Thread the locating pins, 2 pins per bearing cup, 1 per tensioning wheel. See Fig. 8.
36. Position the cover (Fig. 11). Using a crowbar helps.
NOTE! The cover on a HTC 500 can only be fitted in one way. Make sure that all the holes
are correctly positioned.
Fig. 10 Locating pin M10 For tensioning wheel HTC
650 and 800. Not available as Art.
Produced by cutting the head off a
M10 screw.
Fig. 11
39