Sony BKP-L551 Installation Manual page 18

Attaching the Battery Adaptor
4
Remove the two screws and
washers from the battery
adaptor.
5
Use the M4 × 6 screws to fit
the attachment B to the back
side of the battery adapter. Put
the hexagonal wrench back.
6
Insert the attachment B into the
attachment A to attach the
battery adaptor to the camera
adaptor.
7
Connect the DC power cord to
the DC IN connector on the
camera adaptor.
To attach the battery pack, refer to
the section "Attaching the battery
pack" on page 4(E).
6(E)
Hexagonal
wrench
Washer
1 Remove the washers while
holding the screws with the
hexagonal wrench.
M4 × 6 screws
Attachment A
Attachment B
Depress the projection in the slot on the
attachment A with the attachment B.
2 Remove the screws.
Attachment B
Projection
To DC IN
DC power cord