Advertisement
Cleaning and Maintenance
HOW TO CLEAN
CAUTION: Make sure that the Power Pod is unplugged
from the power source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the Power Pod or the
Geared Lid in water or any other liquid.
1
Separate all parts from each other.
2
Clean the Power Pod and Geared Lid with a damp cloth
and wipe dry.
3
Place food processor bowl, chopping bowl and single
serve cups on the bottom rack of the dishwasher. Place
the storage lids, Sip & Seal
™
lids and attachments on
the top rack. Use caution when handling the blade
assemblies as the blades are very sharp.
NOTE: You may also wash the containers by filling the
container to the Max Fill Line with warm water and
a drop of dish washing detergent, placing the blade
assembly in the container, Geared Lid and Power Pod
on top and pulsing a few times. Do not fill the container
more than Max Fill Line with water because it will
overflow. Once clean, remove the Power Pod, Geared
Lid and blade assembly. Rinse the container and
attachment under running water. Wipe the Power Pod
and Geared Lid with a damp cloth. Allow all the parts to
dry before storing.
If the appliance needs servicing, please call customer
service at 0800 51 41 31.
11
0800 51 41 31
HOW TO STORE
1
Secure the power cord by wrapping the cord around the
Power Pod. Do not place anything on top of the Power
Pod. Store the rest of the attachments in a safe place
where they will not be damaged and will not cause a
hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
™
2-in-1 features a unique safety
system which prevents damage to the unit's motor and
drive system should it be inadvertently overloaded. If the
appliance is being overloaded, the motor will stop. To
reset the appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove the Power Pod and Geared Lid and empty the
container and ensure that no food is jamming the blade
assembly.
3
Allow the appliance to cool for approximately 15 minutes.
4
Replace the Geared Lid and Power Pod onto the container
and re-plug the appliance into the electrical outlet.
5
Proceed to use the appliance while making sure not to
exceed the recommended maximum capacities.
Troubleshooting Guide
PROBLEMS
POSSIBLE REASONS & SOLUTIONS
•
Make sure the Power Pod is securely placed on Geared Lid.
•
Make sure the Geared Lid is securely on container.
•
Check that the plug is securely inserted into the electrical outlet.
•
Check fuse or breaker in your home. Replace fuse/reset breaker.
Motor Doesn't Start or Blades
•
Don't Rotate.
Check that the bottom of Power Pod is clean and there is no food blocking
connection when placing on containers.
•
There is too much food in the container. Remove some food and try again.
•
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
•
Either too much food is being chopped at one time, or the pieces are not
small enough. Try cutting the food into smaller pieces of even size and
Food is Unevenly Chopped.
processing smaller amounts per batch.
•
Adjust pulse duration or pulse time.
Food is Chopped Too Finely
•
The food has been over processed. Use brief pulses or process for a shorter
or is Too Watery.
time. Let blades stop completely between pulses.
Food Collects in Geared Lid or
•
Too much food may be being processed at one time. Turn the Power Pod off.
on the Sides of the Nutri Ninja
™
When the blades stop rotating, remove the Power Pod and the Geared Lid.
Food Processor Bowl.
Remove some of the food being processed.
•
Do not use ice that has been sitting out or has started to melt.
You Cannot Achieve Snow
From Solid Ice.
•
Be sure to use short pulses in the beginning to break up large pieces.
To purchase replacement parts, please contact customer service: 0800 51 41 31.
12
Advertisement
