Advertisement
Using the Nutri Ninja
2-in-1
™
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN
USING THE APPLIANCE:
IMPORTANT: Never add ingredients into the
container before placing the blade in first.
IMPORTANT: Attachments are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
CAUTION: DO NOT PROCESS HOT FOODS OR
HOT LIQUIDS.
WARNING: Never leave the appliance unattended
while in use.
CAUTION: Blades are loose. Either pour contents
out with cover on or remove blades before
pouring.
7
0800 51 41 31
CAUTION: If using
the pour spout,
make sure your
thumb is firmly
pressed down on
the thumb tab of
the lid to secure
the lid.
CAUTION: If
pouring with
the lid removed,
ALWAYS remove
the blade
assembly first.
CAUTION: Blades are sharp! Use extreme caution
when handling the blade assemblies. Always hold them
by the shaft.
BEFORE FIRST USE
1
Remove all packaging material and labels from
the appliance.
2
Wash the storage lid, Sip & Seal
lids, bowl, Nutri
™
Ninja
cups and blades in warm, soapy water with a
™
soft cloth. Use caution when washing the blade
assemblies as the blades are very sharp. Rinse
and dry thoroughly.
3
The food processor bowl, Nutri Ninja
™
cups, storage lid,
Sip & Seal
™
lids and blades, are all dishwasher safe. It is
recommended that the storage lid, Sip & Seal
™
blades be placed on the top rack. Ensure that the blades
are removed from the containers before placing in the
dishwasher.
4
The Geared Lid is NOT dishwasher safe. Do not
submerge in water.
5
Wipe the Power Pod and Geared Lid clean with a damp
cloth and wipe dry.
Using the Nutri Ninja
Fig. 1
IMPORTANT: Make sure that the Power Pod is plugged
in for use.
1
Place the Power Pod upside down (with pulse button
down) on a clean, dry, level surface such as a counter
or table top.
2
Add ingredients to the single serve cup.
NOTE: Do not overfill! To avoid spilling, do not add
lids and
ingredients past the "Max" fill line.
3
Place the single serve blade onto the cup and screw it
tightly until a good seal is achieved. (Fig. 1)
4
Turn the Nutri Ninja
cup upside down and place it
™
onto the Power Pod. Press down on the single serve
cup to pulse or blend. (Fig. 2, Fig. 3)
2-in-1 Cup
™
Fig. 2
5
Once desired consistency is reached, remove pressure
from single serve cup. Pull straight up to remove. (Fig. 4)
6
Turn the cup upright and remove the single serve blade
by twisting the blade assembly anticlockwise.
7
Place the Sip & Seal
drink cup, twist to seal and enjoy!
8
Make sure that the Power Pod is unplugged when not
in use.
NOTE: To order additional Nutri Ninja
feel free to contact customer service: 0800 51 41 31.
Fig. 3
Fig. 4
drinking lid onto the single serve
™
Cups, please
™
8
Advertisement
