Front Panel And Connections; Back Panel And Connections - VIETA VH-HT010 User Manual

FRONT PANEL AND CONNECTIONS

Front panel
VH -H T0 10 BK /S L
PO WE R
ON OF F
12
1. Mains switch: Used to turn ON/OFF the power.
2. LED: If press POWER button on remote control, it makes the tuner into Standby mode, and blue LED lights; you
need to press POWER button again to power on.
3. TUNING: For manual tuning, right tuning for high frequency, left tuning for lower frequency;
4. FM/AM: To switch FM or AM mode;
5. AUTOTUNE: Press it for scanning the exiting radio stations.
6. MEMORY: To save the tuned radio stations (together with number buttons on remote and PRESET buttons on
front panel).
7. PRESET- : To choose the previous stored station; and to save the tuned station as a new preset number;
8. PRESET- : To choose the next stored station; and to save the tuned station as a new preset number;.
9 ST/MONO: To switch the tuned FM station in stereo or mono mode;
10. RESET: Press it to clear all the stored stations.
26
- T UN IN G +
FM /A M AU TO TU NE ME MO RY - P RESET + ST /M ON O RESE T
3 4 5 6 7 89 10
Tuner FM/AM

BACK PANEL AND CONNECTIONS

Connections
Stereo Outpu t
R.D. S
RL
RADI O DATA SYS TE M
1
1. Stereo Output: Analogue stereo output. For connection to stereo amplifier or receiver with analogue input.
2. AC input: For connection of mains voltage. Make sure that the plug has been correctly inserted, and that the
voltage corresponds to the text printed on the back panel of the cabinet.
Explanation of VFD display
This unit does not feature any OSD (On Screen Display). Instead it features a more descriptive VFD display
that displays all the information required. Below you can see a picture of the display and an explanation of
the various symbols.
FM ANTENN A AM
VH -H T0 10 BK /S L
AC ~2 20- 240/ 50H z
20 W
KHZ is for AM frequency;
Frequency MHZ is for FM frequency;
Preset number
AC ~2 20 -2 40 V/ 50 Hz
FU SE :T 0. 5A L 2 50 V
2
ENGLISH
27