Table of Contents
Advertisement
Digital Zoom (Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. Zoom is increased by about 2×.
1
Select [On] for [Digital Tele-converter] in W Shooting Menu 1.
2
The view in the monitor will be enlarged by a factor of two.
• The subject will be recorded as it appears in the monitor.
• Digital zoom is not available with multiple exposures, in PHOTO STORY mode, or when
T, s, f, w, or m is selected in scene mode.
• This function is not available when [Movie Effect] is [On] in n mode.
• When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
4
• AF target drops.
Setting the self timer (j/Y)
You can customize the self timer operation.
1
Select [j/Y/i] in W Shooting Menu 1 and press
Q.
2
Select [j/Y] and press I.
3
Select [YC] (custom) and press I.
4
Use FG to select the item and press I.
• Use FG to select the setting and press Q.
Number of Frames
Y Timer
Interval Length
Every Frame AF
90 EN
Sets the number of frames to be shot.
Sets the time after the shutter button is pressed until the picture
is taken.
Sets the shooting interval for the second and subsequent
frames.
Sets whether or not to perform AF right before a picture is taken
with self timer.
Shooting Menu 1
Card Setup
Card Setup
1
Reset/Assign Custom Modes
2
Picture Mode
D
Image Aspect
Digital Tele-converter
j /Y/
Back
Set
j
4:3
Off
Advertisement
Table of Contents
