Introduction; Features; Getting Started; Input Level Control - The t.racks TFX256 PRO User Manual

INTRODUCTION / FEATURES / GETTING STARTED / FRONT-PANEL DESCRIPTION
INTR

INTRODUCTION

INTR ODUCTION ODUCTION ODUCTION
INTR INTR ODUCTION
Congratulations on your purchase of the t.racks TFX256
PRO digital reverberator. The TFX256 PRO is a high
quality and easy-to-use stereo digital reverberator. To
take full ad-vantage of the TFX256 PRO's functions,
and enjoy a longand trouble-free use, please read this
user's manualcarefully and keep it for future reference.

FEATURES

256 effect programs available
Programs include reverb, delay, flanger, chorus,
tremolo, phaser, pan effects and combinations
32-40 bit digital signal processing plus 24 bit
AD/DA conversions
True stereo reverb
Easy-to-read 3-digit LED display
Compact 1U rack-mountable design
Foot switch jacks allow the user to remotely activate
and mute the effect
Auto-bypass when power is off.
Signal and clip LEDs allow easy setup of the optimum
input level
A professional quality digital reverb designed for
musical instruments, recording, and sound reinforce-
ment
FR FR ONT ONT -P -P ANEL DESCRIPTION ANEL DESCRIPTION
FRONT FR FR ONT ONT-P -P -PANEL DESCRIPTION ANEL DESCRIPTION ANEL DESCRIPTION
1

INPUT LEVEL CONTROL

The input level control sets the level going into the
TFX256 PRO. You should set the level so that Peak
(2) indicators only flash RED occasionally.
Page 4
GETTING ST GETTING ST
GETTING ST GETTING ST GETTING STAR
1.
2.
3. Check your cables regularly and label each
4.
5.
6.
7.
2
MIX (DRY / WET) CONTROL
This control sets the balance between the unaf-
fected signal coming through the inputs and the
effects being generated by the TFX256 PRO i.e.
the balance of wet (effect) and dry (no effect)
sounds. By keeping the Mix somewhere in the
center, a blend of dry and wet signal can be
achieved.
TFX256 PRO USER'SMANUAL
AR AR TED TED
AR ARTED TED TED
Check the AC voltage before connecting
the plug. Choose the main supply for the
sound system with care. Do not share
sockets or earthing with light dimmers.
Run audio cables separately from dimmer
wiring, using balanced lines wherever
possible. If necessary, cross audio and
lighting cables at 90 right angles to mini-
o
mize the possibility of interference. Keep
unbalanced cabling as short as possible.
end for easy identification.
Before switching on the main power, keep
all output rotary faders all the way down to
prevent damage or excessive noise
caused by bad level adjustment, wrong
w i r i n g , d e f e c t i v e c a b l e s , o r b a d
connections.
Always turn on the TFX256 PRO before
the power amplifier; turn off the TFX256
PRO after turning off the amplifier.
Always turn off the unit before connecting
or disconnecting the unit to the power
source.
Never use any solvents to clean the unit.
Clean it with a soft, dry cloth.