Install A Memory Card; Replace The Back Cover; Charge The Battery; Install The Battery - Samsung Galaxy Amp prime User Manual

Install a Memory Card

You can install an optional microSD
microSDHC memory card (not included) to add
™
more memory space to your device.
Note: A memory card can be installed at any time.
It is not necessary to install it prior to using the device.
Note: The micro SD card slot is located above the
SIM card slot.
1. Remove the back cover. For more information,
see Remove the Back
2. Slide the memory card into the slot with the gold
contacts facing down.
3. Replace the back cover. For more information,
see Replace the Back

Install the Battery

1. Insert the battery into the opening on the back of
the device, making sure the connectors align.
2. Gently press down to secure the battery.
Getting Started
or
™
Cover.
Cover.

Replace the Back Cover

1. Place the back cover onto the back of the device
and press down.
2. Press along the edge of the back cover until you
have a secure seal.

Charge the Battery

Your device is powered by a rechargeable, standard
Li-Ion battery. A USB charger (charging head and
USB cable) is included with the device for charging
the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Note: It is recommended you fully charge the battery
before using your device for the first time.
Caution: Use only charging devices and batteries
approved by Samsung
designed for your device to maximize battery life.
Using other accessories may invalidate your warranty
and may cause damage.
5
™ . Samsung accessories are
Assemble Your Device