Connect.power; Battery Installation; Precautions.concerning.batteries; Install.remote.control.batteries - VIETA VH-SB550BK User Manual

1
Connect the audio player.
- For audio players with RCA audio output
sockets: Connect audio cable to the AUX IN
L/R sockets and to the audio output sockets
on the audio player.
- For audio players with headphone sockets:
Connect the MP3 Link cable to the MP3
LINK socket and to the headphone socket on
the audio player.
2
Press the AUX/MP3 LINK button to select the
AUX source or MP3 Link source.
3
Start to play on the audio player.
Connect Power
Caution:
- Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage
printed on the back or the underside of the unit.
- Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the AC power cord to:
- the AC~ socket on the unit.
- the wall socket.
Install Remote Control Batteries
The provided Remote Control allows the unit to
be operated from a distance.
When operating the Remote Control, point it
towards the remote sensor on the front panel of
the unit.
Even if the Remote Control is operated within

the effective range (5m), remote control
operation may be impossible if there are any
obstacles between the unit and the remote
control.
If the Remote Control is operated near other

products which generate infrared rays, or if other
remote control devices using infrared rays
are used near the unit, it may operate incorrectly.
Conversely, the other products may operate
incorrectly.

Battery Installation

1
Remove the battery compartment cover.
2
Insert two "AAA" (R03 or UM-4) dry batteries.
Make sure that the batteries are inserted
with their positive "" and negative "" poles
positioned correctly.
3
Close the cover.
Precautions Concerning Batteries
Be sure to insert the batteries with correct

positive "" and negative "" polarities.
Use batteries of the same type. Never use

different types of batteries together.
Either rechargeable or non-rechargeable

batteries can be used. Refer to the precautions
on their labels.
When the Remote Control is not to be used for a

long time (more than a month), remove the
battery from the Remote Control to prevent it
from leaking.
If the batteries leak, wipe away the leakage

inside the battery compartment and replace the
batteries with new ones.
Do not use any batteries other than those

specified.Do not mix new batteries with old ones.
Do not heat or disassemble batteries. Never

throw them in fire or water.
Do not carry or store batteries with other metallic

objects. Doing so could cause batteries to short
circuit, leak or explode.
Never recharge a battery unless it is confirmed

to be a rechargeable type.
9