Connect One Of The Adaptors To Your Modem Or Router - D-Link PowerLine DHP-P309AV Setup Manual

CONNECT ONE OF THE
STEP 1
ADAPTORS TO YOUR
MODEM OR ROUTER
BITS YOU'LL NEED:
Go to the room with your existing modem or router.
Plug one end of the Ethernet Cable (B) into a spare port on the back of your
existing modem or router.
Plug the other end of the Ethernet Cable (B) into the top of the Adaptor (A).
Plug the Adaptor (A) attached to the Ethernet Cable (B) into a power point
near your existing modem or router.
IF YOU'RE USING POWERBOARDS, EXTENSION CORDS
OR SURGE-PROTECTION BOARDS
DO plug the Adaptor (A) directly into the wall socket.
DO plug the extension cord, surge-protection board or powerboard into the power
socket on the front face of the Adaptor (A) only if it is plugged into the wall.
DON'T plug the Adaptor (A) directly into an extension cord, surge-protection
board or powerboard.
A.
WHITE ADAPTOR
(B)
YOUR MODEM
(A)
(A)
(A)
B.
ETHERNET CABLE
WALL POWER POINT
POWER BOARD
POWER BOARD
3