Clip List Playback - Sony PDW-1500 Operation Manual

To escape from the essence mark selection screen to
the previous screen
Press the RESET button.
2
Use the arrow buttons to select the desired essence
mark.
You can select essence marks with the following
operations.
Press the PREV or NEXT button: Move to the
previous or next essence mark.
3
Press the SET button.
Thumbnails of the frames including the selected
essence mark appear.
(The example shows the case where SHOT MARK1 is
selected as the essence mark.)
This indicates that the thumbnail
images are the frames including the
essence mark (SHOTMARK1).
Currently selected
SHOTMARK1 frame
Date and time of recording of the clip
containing the selected frame
4
Use the arrow buttons or jog dial to select the desired
frame.
You can select frames with the following operations.
Press the PREV or NEXT button: Move to the
previous or next frame.
Press the PREV or NEXT button with the SHIFT
button held down: Move to the first or last frame.
Press the F or f button with the SHIFT button held
down: Switch to the previous or next page.
5
Press the SET button to cue up the selected clip.
To start playback from the selected frame, press the
PLAY button.
Sixth frame is selected
from a total of 31
SHOTMARK1 frames

4-2-4 Clip List Playback

You can play back clips in the order of clip lists created
with the scene selection function (see page 55).
Playing back in clip list order
Proceed as follows.
1
If the clip list that you want to play exists on the disc,
load it into the current clip list.
About the current clip list, see page 53.
For the clip list loading operation, see 5-3-3
"Clearing the Current Clip List From the Unit
Memory" (page 65).
2
Press the SUBCLIP button, turning it on.
3
Press the PLAY button.
Playback begins from the first sub clip in the current
clip list.
Note
Depending on the length of sub clips in the clip list and
their arrangement on the disc, playback may freeze
momentarily between sub clips.
Cuing up with sub clip thumbnails
With the desired clip list loaded in the current clip list,
proceed as follows.
1
Press the SUBCLIP button and the THUMBNAIL
button, turning them on.
Thumbnails of the first frames in the sub clips appear.
53
4-2 Playback