View Clock Displays - Oregon Scientific RA202 User Manual

VIEW CLOCK DISPLAYS

Within the Clock Mode there are 7 different screen
displays. To switch between them:
1. Press MODE to navigate to the Clock Mode.
2. Press SELECT to scroll through the different clock
screen displays.
Clock with Date Clock with Date Clock with Date Clock with Clock with Clock with
Seconds Seconds Seconds
Clock with Sea Clock with Local
Level Level Level Pressure Pressure Pressure
Clock with
Temperature
Clock with Clock with Clock with
Altitude Altitude Altitude
SET THE DAILY ALARM / TIME ZONE / KEYPAD
TONE
From any of the 7 clock screen displays you can set
the:
•
Clock with Clock with
•
Timer Timer Timer
•
8
NOTE When wearing the watch, When wearing the watch,
the temperature measured could
be affected by body heat. To
acquire an accurate temperature
reading, remove the watch from
your wrist and wait for about
15 minutes before taking the
Daily Alarm - When activated the alarm will go off
daily at the set time
Time Zone Offset - Offsets the time setting when
you are in a different time zone (+ / - 23 hours)
Keypad Tone - When set to ON the keypad will
sound when pressed