Set The Bearing Tracking System - Oregon Scientific RA202 User Manual

Compass with Compass with Compass with Compass with Compass with Compass with
Clock Clock Clock Altitude Altitude Altitude
Compass with Compass with Compass with Compass with Compass with Compass with
Local Pressure Local Pressure Local Pressure Timer Timer Timer
From any of the 5 compass screen displays you can
set the:
• Bearing Tracking System - Select ON / OFF; set
bearing
• Declination - Select ON / OFF; set declination
angle
• True North Calibration - Select ON / OFF; set true
north calibration
Compass with Compass with Compass with

SET THE BEARING TRACKING SYSTEM

Sea Level Sea Level Sea Level
The bearing tracking system can be set to lock on a
specifi c bearing you wish to follow. By locking the bearing
you can see when you deviate from your course and how
much you need to correct it to get back on track.
1. In any compass display screen,
Compass with Compass with Compass with
Temperature Temperature Temperature
2. Press and hold SET to enter
•
•
3. Move the compass until the bearing you wish to lock
4. Press SET to confi rm the setting.
5. To fi ne-tune the bearing, press + or -.
6. Press SET to lock the setting.
7. In the Compass Mode, the locked value will appear
18
press SET until the screen
opposite appears.
setting mode.
The top number shows your
previous locked bearing.
The bottom flashing number
shows your current bearing.
is displayed and press SELECT.
at the bottom of the display instead of the cardinal
reading.