Operations - XPower X-430TF + 430MDK Owner's Manual

Carefully read Safety Instructions (page 6) before starting operations
1. Prior to plugging the unit into the power source, inspect completely for any shipping damage.
2. Carefully place the Air Mover unit on a stable, flat dry surface.
3. Plug the electrical cord into the power outlet.
4. The unit is capable to be used at 4 different
angles to direct air flow, except that the unit
with handle is at 3 different angles.
5. Turn the switch to select desired speed, while
making sure unit operates normally.
6. All Air Movers in operation must be supervised
at all times.
Filters:
a set of Filters is included with air mover, which will help prevent small debris and dust from entering the
unit. To clean the filters, simply remove the filters from the unit and wash with warm soapy water, rinse with clean
water and let dry thoroughly before reinstalling.
Installation:
Filters snaps into the air inlets.
Note:
The filter I is for Motor Side,
The filter II is for Fan Side

Operations

TM
Filter Removal:
Pull the filters off the unit.
Note:
After cleaning make sure the
filters are dry before
reinstalling.
Timer Instruction
Use the Timer to set the preferred
time from 1 min to 180 min