Introduction XPOWER Cage Dryers, Air Movers with Multi Drying Kits (MDKs), are specially designed for the professional pet grooming industry. Cage Dryers are offered in two models: X-430TF w/ 430MDK and X-800TF w/ 800MDK. With the most efficient engineering design, professional Level Multifunctional Air Movers X-430TF and X-800TF are ETL/CETL Certified, and also used in many other industies.
Operations Carefully read Safety Instructions (page 6) before starting operations 1. Prior to plugging the unit into the power source, inspect completely for any shipping damage. 2. Carefully place the Air Mover unit on a stable, flat dry surface. 3. Plug the electrical cord into the power outlet. 4.
Multiple Drying Kit - 430/800 MDK As a Cage Dryer, the Multiple Drying Kit, 430MDK / 800MDK combined with X-430TF / X-800TF is specially designed for professional pet grooming industry. Attach to Air Mover Use for Cage Dryer The MDK includes: (A) Air Mover Adapter (1) (B) 8 ft Flex Hoses (3) (C) Air ow Adjustment Doors (3)
Page 6
1) Clamp Air Mover Adapter (A) to air-outlet of the 2) Attach each Flex Hose (B) to Adapter (A) by using air mover. Make sure the Snap Lock Buckles on the Hose Clamp (D). Tighten Hose Clamp (D) with both sides of the Adapter are securely locked. a flat head screwdriver (not included).
Safety Instructions 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or any part of body. 3.
Page 8
Maintenance Instructions 2. Never clean the Air Mover with water directly. When not in use, unplug and store the Air Mover in a dry indoor place out of reach of children. Clean the filters ( for unit with filters) often as necessary to avoid loss of airflow when available. Troubleshooting For any problems not listed below, call your local distributor or contact our Service Department Air Mover...
XPOWER Service Department. XPOWER to inspect, assess and advise the repairs needed and the applicable cost, if any. For users outside the US, please contact XPOWER Distributor in your country or region for Warranty service and parts replacement. - 10 -...
Page 12
(for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 220 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.ws)
Page 13
Introduction XPOWER Cage Dryers, Air Movers with Multi Drying Kits (MDKs), are specially designed for the professional pet grooming industry. Cage Dryers are offered in two models: X-430TF w/ 430MDK and X-800TF w/ 800MDK. With the most efficient engineering design, professional Level Multifunctional Air Movers X-430TF and X-800TF are ETL/CETL Certified, and also used in many other industies.
Page 15
Multiple Drying Kit - 430/800 MDK As a Cage Dryer, the Multiple Drying Kit, 430MDK / 800MDK combined with X-430TF / X-800TF is specially designed for professional pet grooming industry. Attach to Air Mover Use for Cage Dryer The MDK includes: (A) Air Mover Adapter (1) (B) 8 ft Flex Hoses (3) (C) Air ow Adjustment Doors (3)
Page 16
1) Clamp Air Mover Adapter (A) to air-outlet of the 2) Attach each Flex Hose (B) to Adapter (A) by using air mover. Make sure the Snap Lock Buckles on the Hose Clamp (D). Tighten Hose Clamp (D) with both sides of the Adapter are securely locked. a flat head screwdriver (not included).
Page 17
XPOWER Service Department. XPOWER to inspect, assess and advise the repairs needed and the applicable cost, if any. For users outside the US, please contact XPOWER Distributor in your country or region for Warranty service and parts replacement. - 10 -...
Page 18
Switch Knob & Timer Knob Filters Capacitor (for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 220 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.ws)
Need help?
Do you have a question about the X-430TF + 430MDK and is the answer not in the manual?
Questions and answers