Engine Immobiliser - Renault Clio Owner's Manual

ENGINE IMMOBILISER

This prevents the vehicle being
driven by anyone not in possession
of the vehicle's coded ignition key.
Operating principle
The vehicle is automatically
protected a few seconds after the
key is removed from the ignition.
If the vehicle does not recognise the
ignition key code, indicator light 1
will flash continuously and the
engine cannot be started.
Any work
modification
engine immobiliser
(computer, wiring, etc.)
may be dangerous. It must be
carried out by trained RENAULT
network personnel.
Indicator light
System operational indicator light
When the ignition is switched on,
indicator light 1 comes on for
approximately three seconds and
then goes out. The vehicle has
recognised the code. You may start
the engine.
or
to the
Vehicle protection indicator light
A few seconds after the ignition has
been switched off, indicator light 1
will flash constantly.
The vehicle will not be protected
until the key has been taken out of
1
the ignition.
Operating fault warning light
After the ignition has been switched
on, if warning light 1 continues to
flash or remains continuously lit,
this indicates a system operating
fault.
In all cases, it is essential to contact
a RENAULT Dealer, who alone is
qualified to repair the engine
immobiliser.
If the coded ignition key is faulty,
use the second key (supplied with
the vehicle).
1.07