Adjusting Sound Settings; Sound Effect; Speaker Settings - Samsung T24D390AK User Manual

Basic Features

Sound Effect

→ →
Menu Sound Sound Effect
✎
Available only when the
DTS TruSurround HD
•
Produces sound that will make you feel like you are sitting in a movie theatre or concert hall.
DTS TruDialog
•
Increases the voice intensity to make dialog clearer.
• Equaliser
The Equaliser displays a series of sliders. Use the arrow buttons to select a slider, and change the slider's value. To
Reset the Equaliser, select the Reset. A pop-up appears asking if you want to reset, select Yes; otherwise select No.
To exit, select Close.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz
frequencies.
Reset: Resets the equalizer to its default settings.

Speaker Settings

→ →
Menu Sound Speaker Settings
• Auto Volume
Because each station has its own broadcasting conditions, the volume may fluctuate each time you change
the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
✎
To use the volume control of a connected source device, set
control of the connected source device may not be applied if

Adjusting Sound Settings

Sound Mode is set to Standard.
/ 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the loudness of specific bandwidth
English - 34
Auto Volume to Off. A change to the volume
Auto Volume is set to Normal or Night.