Table of Contents
Advertisement
LC-40LE732
LC-46LE732
1. General ICs Information (continued)
•
Customizable vendor ID, product ID, and device ID.
•
ESD protection up to 4 kilovolts on all USB pins.
•
Supports self- or bus-powered operation.
•
USB251xB2 and USB251xBi products support the USB Battery Charging specification.
•
Package: 36-pin QFN (6x6 mm).
• IC9553: Low Dropout LDO (USB2)
Part number: S-1170B50UC-OUJTFG
Sharp code: VHIS170B50U-1Y
http://datasheet.sii-ic.com/en/voltage_regulator/S1170_E.pdf
The S-1170 Series is a positive voltage regulator with a low dropout voltage (LDO), high output voltage accuracy, and low current
consumption developed based on CMOS technology.
A built-in low on-resistance transistor provides a low dropout voltage and large output current, a built-in overcurrent protector
prevents the load current from exceeding the current capacitance of the output transistor, and a built-in thermal shutdown circuit
prevents damage caused by the heat. An ON/OFF circuit ensures a long battery life. Compared with the voltage regulators using the
conventional CMOS process, a larger variety of capacitors are available, including small ceramic capacitors. Small SOT-89-5 and
6-Pin HSON(A) packages realize high-density mounting.
Features
•
Output voltage: 1.5 V to 5.5 V, selectable in 0.1 V steps.
•
High-accuracy output voltage: ±1.0%.
•
Low dropout voltage (LDO): 120 mV typ. (3.0 V output product, Iout =300 mA).
•
Low current consumption: During operation 80 μA typ. 160 μA max., During shutdown 0.1 μA typ. 1.0 μA max.
•
High peak current capability: 800 mA output is possible (@ Vin >Vout(S) +1.0 V) *1
•
Built-in ON/OFF circuit: Ensures long battery life.
•
Low ESR capacitor can be used: A ceramic capacitor of 4.7 μF or more can be used for the output capacitor.
•
High ripple rejection: 70 dB typ. (@ 1.0 kHz)
•
Built-in overcurrent protector: Overcurrent of output
transistor can be restricted.
•
Built-in thermal shutdown circuit: Damage caused by
heat can be prevented.
•
Package: SOT-89-5, 6-pin HSON(A).
• IC9553: 2Mbit SPI-FLASH Memory
Part number: W25X20BV
Sharp code: RH-IXD084WJZZY
http://www.winbond.com/NR/rdonlyres/AEC6E481-6616-4555-B339-6E79D17810AC/0/W25X10BV_W25X20BV_W25X40BV.pdf
•
Single and Dual Serial Peripheral Interface.
•
Uniform 4KB erasable sectors & 32KB/64KB erasable blocks.
•
1024 pages (256 bytes), page program in 0.7mS (typ.)
•
Fast Read (0Bh), Fast Read Dual Output (3Bh) and Fast Read Dual I/O (BBh) instructions.
•
Clock operation up to 104MHz (208MHz equivalent with Fast Read Dual Output).
•
2.7 to 3.6V power supply.
•
4mA active read current, 1μA power down current.
•
-40° to +85°C operating range.
•
Electronic ID in Single or Dual I/O mode.
•
Read Unique ID (4Bh) instruction.
•
Hardware and software write protection for top or bottom blocks.
42
.
Hide quick links:
Advertisement
Table of Contents
