Contents Of Hardware Pack - MTD OHD 190-180 Operator's Manual

CONTENTS OF HARDWARE PACK

This grass collector kit is shipped with a hardware pack enclosed. This hardware pack may contain extra
parts for installation on a different rider from which you have. Please check your hardware pack against the
illustration below in accordance with your model of rider as determined in Section 1 of this manual.
For all Model Series 650 through 699 tractors
(2)
A
(2)
B
For all Model Series 700 tractors
(2)
A
(2)
B
For older tractors only
NOTE: Each item has been identified in above for ease of assembly, and the letter code assigned here is maintained
in assembly instructions.
RH = Right Hand (#) = Quantity
LH = Left Hand
(2)
C
(2)
C
(4)
D
For decks with grass catcher pin
not pre-installed
(1)
E
Figure 4
5
(1) (1)
F2 F1
(LH) (RH)
(1) (1)
F2 F1
(LH) (RH)
(1)
G
(1)
H
2
Carton
Contents
If you are missing
any parts, please
do not contact the
retailer where you
purchased this unit,
call MTD directly at
1-330-220-4MTD or
toll free at
1-800-800-7310.
NOTE: Each item
has been identified
in above for ease of
assembly, and the
letter code assigned
here is maintained
in assembly instruc-
tions.
RH = Right Hand
LH = Left Hand
(#) = Quantity