Connection; Basic Connections - Panasonic DMR-XW390 Operating Instructions Manual

Connection

Basic connections

• Before connection, turn off all equipment and read the appropriate operating instructions.
This unit's rear panel
If the TV does not have the HDMI terminal
Connect the TV with the Audio/Video cable. (
About HDMI cable
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
• When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
• Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode.
[approx. 1.1 W ("Power Save in Standby" is activated)]
• The HDMI connection supports VIERA Link "HDAVI Control" (
• You cannot connect this unit to DVI devices that are incompatible with HDCP.
Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio
cannot be output.)
• If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down
mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
Downloaded from www.Manualslib.com
Household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Cooling fan
HDMI cable
HDMI IN
TV's rear panel
manuals search engine
To the aerial
Aerial cable
RF coaxial cable
(supplied)
VHF/UHF
RF IN
14)
62).
Getting started
13
VQT4C72