IGNITION
Checking and adjustment of double contact breaker
(fig. 25)
Maintenance
Every 3000 km (2000 mile.)
Lightly moisten with some engine oil drops the
cam felt
pad.
Inspection
•
remove the contact breaker cover by undoing
the securing screws;
•
if contacts
«A»
and «e» are dirty and greasy,
clean them with a petrol moistened rag. If they
are in any way damaged replace them;
~.
check points gap of breaker
«A»
(right cylin-
Cle(
-
red cable) and breaker
«e»
(left cylinder -
green cable) which should be between mm 0,42
-+-
0,48. If this distance is higher or lower, the
points have to be adjusted.
Adjustment of contact points
Contact points «A» - right points
Bring cam "I» to maximum
lift,
loosen screws
"C»
and
,,0»
and move plate
"E»
by acting on
nocht
"F»
.
43